Hello all,
I have a trap I'm receiving from a device that has been showing up as
unknown. After talking to the owner of the equipment, who assured me that
the software revision was at the current level, I was able to obtain the MIB
from the vendor. The MIB was in version 2 format, so I loaded it up and
added the definitions to the trapd.conf file using the LOAD/UNLOAD MIB and
the mib2trap process.
The problem is that the traps are still coming in as unknown. What is weird
about the situation is I issued the trap myself with the snmptrap command
and when the trap came in as unknown, I selected browse MIB and it is
attempting to go to the SNMP MIB file location not the SNMPV1/SNMPV2
location, where I loaded the MIB. I can't load the MIB under SNMP because
the format is in V2. So has anyone encountered this before?
Thanks in advance for the help.
Scott Hammons, Consultant
Tivoli Certified Consultant
Advanced Integrated Solutions, Inc.
www.ais-nms.com
Email s.hammons@ais-nms.com
Voice Pager (888) 520-0517
|