RE: Framework 3.7.1 and 3.7B

["Donald Richards" <dprich@nortelnetworks.com>]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

Tivoli has a good "Installation Road Map" on page 2 of GI10-4834-02.pdf.
 
Regards,
Don 

-----Original Message-----
From: CATALINA MARTINEZ [mailto:CATALINA.MARTINEZ@tlc.state.tx.us]
Sent: Wednesday, May 16, 2001 12:06 PM
To: nv-l
Subject: Re: [NV-L] Framework 3.7.1 and 3.7B


Jorge,
This is what I did: clean install
 
Installed 4.3.3. AIX, created all FS and directories.
created /usr/local/Tivoli/isntall_dir
ran the ./wserver -c script
the framework Installation ran successfully.
then I installed the Framework 3.7 patch. 
  (Desktop--Install--Install Patch--Framework 3.7 fro AIX Endpoint)
 
this is where I am not sure if this is correct or an error. I only have 1
Netview server (no other managed nodes or clients or endpoints) that handles
everything.
 

So, should I have installed 3.6.2, then 3.7, then 3.7.1
or 
3.6.2 then 3.7.1
or 
if I have 3.7 installed just go directly to 3.7.1
 
Does it even matter?
Another question: when I installed the patch 3.7 (clean install) on my
Netview Server, the only selection I got was Framework 3.7 for AIX endpoint.
Is my TMR Server also an endpoint? Or should I have selected product install
instead of a patch?
 
How do I uninstall the patch? 
 
I apologize for asking basic questions, but I am new to Netview and dont
have anyone else here to ask.
 
Thanks for your replies.


>>> balmaced@mx1.ibm.com 05/16/01 01:07PM >>>

The version 3.7.1 is the most recent version of Framework, in this version
have support to Socket Layer 3 plus other fixes and patches.

If you install from previus version of 3.7 you need install before the
patch 3.6.5 and then upgrade to 3.7.1.

The command odadmin reexec all is probably dont work if you dont have
setted the enviroment variables (/etc/Tivoli/setup_env.sh), and/or  then
try with:

odadmin shutdown 1

if the TMR is the same NetView Server or if you NetView Server is a Manged
Node:


odadmin shutdown Number_of_dispatcher


Jorge Balmaceda Aguilar
Consultor GCC/IBM
Telefono (52) 5270-5448
PIN: Skytel 5634919



 

                    "CATALINA MARTINEZ"

                    <CATALINA.MARTINEZ@tlc.st       To:     <nv-l@tkg.com>

                    ate.tx.us>                      cc:

                    Sent by:                        Subject:     [NV-L]
Framework 3.7.1 and 3.7B        
                    owner-nv-l@tkg.com

 

 

                    16/05/01 02:08 PM

                    Please respond to IBM

                    NetView Discussion

 

 




To all,

I just received Framework 3.7.1 and 3.7B, what is the difference? Which one
do I want to upgrade to? I installed 3.7, but have not installed Netview
yet, i am running into problems.

Please advise.



_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
<http://www.tkg.com/nv-l>

Tivoli has a good "Installation Road Map" on page 2 of GI10-4834-02.pdf.

 

Regards,

Don

-----Original Message-----
From: CATALINA MARTINEZ [mailto:CATALINA.MARTINEZ@tlc.state.tx.us]
Sent: Wednesday, May 16, 2001 12:06 PM
To: nv-l
Subject: Re: [NV-L] Framework 3.7.1 and 3.7B

Jorge,

This is what I did: clean install

 

Installed 4.3.3. AIX, created all FS and directories.

created /usr/local/Tivoli/isntall_dir

ran the ./wserver -c script

the framework Installation ran successfully.

then I installed the Framework 3.7 patch.

  (Desktop--Install--Install Patch--Framework 3.7 fro AIX Endpoint)

 

this is where I am not sure if this is correct or an error. I only have 1 Netview server (no other managed nodes or clients or endpoints) that handles everything.

 

So, should I have installed 3.6.2, then 3.7, then 3.7.1

or

3.6.2 then 3.7.1

or

if I have 3.7 installed just go directly to 3.7.1

 

Does it even matter?

Another question: when I installed the patch 3.7 (clean install) on my Netview Server, the only selection I got was Framework 3.7 for AIX endpoint. Is my TMR Server also an endpoint? Or should I have selected product install instead of a patch?

 

How do I uninstall the patch?

 

I apologize for asking basic questions, but I am new to Netview and dont have anyone else here to ask.

 

Thanks for your replies.

>>> balmaced@mx1.ibm.com 05/16/01 01:07PM >>>

The version 3.7.1 is the most recent version of Framework, in this version
have support to Socket Layer 3 plus other fixes and patches.

If you install from previus version of 3.7 you need install before the
patch 3.6.5 and then upgrade to 3.7.1.

The command odadmin reexec all is probably dont work if you dont have
setted the enviroment variables (/etc/Tivoli/setup_env.sh), and/or  then
try with:

odadmin shutdown 1

if the TMR is the same NetView Server or if you NetView Server is a Manged
Node:


odadmin shutdown Number_of_dispatcher


Jorge Balmaceda Aguilar
Consultor GCC/IBM
Telefono (52) 5270-5448
PIN: Skytel 5634919



                                                                                                       
                    "CATALINA MARTINEZ"                                                                
                    <CATALINA.MARTINEZ@tlc.st       To:     <nv-l@tkg.com>                             
                    ate.tx.us>                      cc:                                                
                    Sent by:                        Subject:     [NV-L] Framework 3.7.1 and 3.7B       
                    owner-nv-l@tkg.com                                                                 
                                                                                                       
                                                                                                       
                    16/05/01 02:08 PM                                                                  
                    Please respond to IBM                                                              
                    NetView Discussion                                                                 
                                                                                                       
                                                                                                       



To all,

I just received Framework 3.7.1 and 3.7B, what is the difference? Which one
do I want to upgrade to? I installed 3.7, but have not installed Netview
yet, i am running into problems.

Please advise.



_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l