Re: mib2trap error:brocade

["CATALINA MARTINEZ" <CATALINA.MARTINEZ@tlc.state.tx.us>]

This is a MIME message. If you are reading this text, you may want to 
consider changing to a mail reader or gateway that understands how to 
properly handle MIME multipart messages.

James,

There are 4 mibs that I am trying to add the traps. i am successful in loading 
1. They are v2_4FE.mib v2_4FA.mib v2_4SW.mib v2_4TRP.mib

mib2trap v2_4xx.mib v2_4xx.trap (I do this for all 4).

When I run the FA i get
Trap connUnitStatusChange has been added
Trap connUnitDeletedTrap has been addd
Trap connUnitEventTrap has been added
Trap connUnitPortStatusChange has been added.

Then when I run mib2trap on v2_4FE.mib and v2_
4SW.mib. I dont get any errors just an empty script.

When I run mib2trap for v2_4TRP.mib I get:
" ERRORs- no script generated" 
and nothing else.

Any suggestions?


>>> SHANKS@us.tivoli.com 09/20/01 02:21PM >>>
That would mean that the MIB you ran this on had parsing problems so the
output of mib2trap, which is an addtrap script, could not be created.
If we cannot parse the MIB then we don't know what to put in the output
file.  But you should have received other messages ahead of that one which
indicated the nature of the problem.  Did you not get any  other messages
first?

James Shanks
Level 3 Support
Tivoli NetView for UNIX and NT
Please note that my new id is jshanks@us.ibm.com



"CATALINA MARTINEZ" <CATALINA.MARTINEZ@tlc.state.tx.us>@tkg.com on
09/20/2001 02:42:23 PM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:  owner-nv-l@tkg.com


To:   <nv-l@tkg.com>
cc:
Subject:  [NV-L] mib2trap error:brocade




To all,

I loaded new mibs (which I can see through mib browser)  however when I am
running mib2trap I get:

ERROR  script not created

how do I know what's the error?

I am havent grasp the concept of loading mibs and adding  traps. I have
done a cisco and aironet but it was more like being stuck in 1st  gear.

any help I would appreciate it.

Catalina
AIX 4.3.3 Netview 6.0.2


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l

James,

 

There are 4 mibs that I am trying to add the traps. i am successful in loading 1. They are v2_4FE.mib v2_4FA.mib v2_4SW.mib v2_4TRP.mib

 

mib2trap v2_4xx.mib v2_4xx.trap (I do this for all 4).

 

When I run the FA i get

Trap connUnitStatusChange has been added

Trap connUnitDeletedTrap has been addd

Trap connUnitEventTrap has been added

Trap connUnitPortStatusChange has been added.

 

Then when I run mib2trap on v2_4FE.mib and v2_

4SW.mib. I dont get any errors just an empty script.

 

When I run mib2trap for v2_4TRP.mib I get:

" ERRORs- no script generated"

and nothing else.

 

Any suggestions?

>>> SHANKS@us.tivoli.com 09/20/01 02:21PM >>>
That would mean that the MIB you ran this on had parsing problems so the
output of mib2trap, which is an addtrap script, could not be created.
If we cannot parse the MIB then we don't know what to put in the output
file.  But you should have received other messages ahead of that one which
indicated the nature of the problem.  Did you not get any  other messages
first?

James Shanks
Level 3 Support
Tivoli NetView for UNIX and NT
Please note that my new id is jshanks@us.ibm.com



"CATALINA MARTINEZ" <CATALINA.MARTINEZ@tlc.state.tx.us>@tkg.com on
09/20/2001 02:42:23 PM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:  owner-nv-l@tkg.com


To:   <nv-l@tkg.com>
cc:
Subject:  [NV-L] mib2trap error:brocade




To all,

I loaded new mibs (which I can see through mib browser)  however when I am
running mib2trap I get:

ERROR  script not created

how do I know what's the error?

I am havent grasp the concept of loading mibs and adding  traps. I have
done a cisco and aironet but it was more like being stuck in 1st  gear.

any help I would appreciate it.

Catalina
AIX 4.3.3 Netview 6.0.2


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l