nv-l
[Top] [All Lists]

Re: [nv-l] Inline Action in Rulesets

To: James Shanks <jshanks@us.ibm.com>, nv-l@lists.tivoli.com
Subject: Re: [nv-l] Inline Action in Rulesets
From: "Ray Westphal" <westphal@accessus.net>
Date: Mon, 02 Dec 2002 10:43:16 -0600
Thanks James.

The Event Stream node is set to BLOCK. I guess I'll call NV
Support. 

Ray.

On Mon, 2 Dec 2002 10:47:12 -0500
 James Shanks <jshanks@us.ibm.com> wrote:
> I am guessing here and you may have to call Support to
> get someone to look 
> at your issues in more detail.
> 
> (1) Is the Event Stream node in your TEC ruleset set to
> PASS or BLOCK. 
> I'll bet it's PASS and the one in ESE.automation is
> BLOCK.
> If that's not it, then I am mystified and my guess is
> that you will have 
> to turn on the "nvcdebug -d all" trace and call Support.
> 
> (2) If you use serversetup or smitty to alter the
> tecint.conf, then it 
> automatically stops and restarts the nvserverd daemon
> every time you click 
> "OK".
> 
> If you want to leave nvserverd up and running, then you
> will have to edit 
> the tecint.conf file by hand and use the nvtecia command
> (see the man 
> page) to cause nvserverd to stop/reload the tecint.conf.
> 
> Hope this helps.
> 
> 
> James Shanks
> Level 3 Support  for Tivoli NetView for UNIX and NT
> Tivoli Software / IBM Software Group
> 
> 
> 
> 
> "Westphal, Raymond" <RWestphal@erac.com>
> 12/02/2002 10:20 AM
> 
>  
>         To:     "NV List (E-mail)"
> <nv-l@lists.tivoli.com>
>         cc: 
>         Subject:        [nv-l] Inline Action in Rulesets
> 
> 
> 
> Hello Everyone
> 
> NetView 7.1.3 on AIX 4.3.3 ML10.
> 
> I'm trying to prevent node down events for several nodes
> from reaching 
> TEC.
> I placed an Inline Action Node in the event stream. It
> simply greps for
> NodeA or NodeB in $NVATTR_2. If it is not found - the
> grep fails, then the
> return code is 1 and the event should be forwarded. 
> 
> This doesn't work in the TEC forwarding rule but it does
> work in another
> ruleset controlled by actionsvr. I use the same method in
> an actionsvr
> (ESE.automation) ruleset. If the Inline Action grep
> fails, then the event 
> is
> not sent to the next node, an Action node, which echoes
> some environment
> variables to a file. 
> 
> Any changes I make to TEC forwarding is resetting the
> nvserverd daemon. I
> get the popup warning about nvserverd down. 
> 
> What am I doing wrong?
> 
> Thanks in advance.
> 
> Ray Westphal
> Enterprise Rent-A-Car
> 
>
---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail:
> nv-l-help@lists.tivoli.com
> 
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need
> immediate
> assistance from Tivoli please call the IBM Tivoli
> Software Group
> help line at 1-800-TIVOLI8(848-6548)
> 
> 
> 
> 
> 
>
---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail:
> nv-l-help@lists.tivoli.com
> 
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need
> immediate
> assistance from Tivoli please call the IBM Tivoli
> Software Group
> help line at 1-800-TIVOLI8(848-6548)
> 


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web