Andrea
Just to double check. Can you resolve all 4 interfaces (both forward and
reverse lookups) to the same fully qualified name?
Thanks
Alan E. Hennis
Caterpillar Inc.
Systems+Process Division
309.494.3308
hennis_alan_e@cat.com
Andrea_Martino@Pe
pBoys.com
07/10/2003 10:41
AM To: nv-l@lists.tivoli.com
cc:
Subject: Re: [nv-l] Discovering
duplicate routers
Caterpillar: Confidential Green Retain Until: 08/09/2003
Retention Category: G90 -
General
Matters/Administration
I can't resolve all 4 interfaces to the same hostname. I edited the
seedfile to only discover the ethernet interfaces and exclude the other
interfaces but Netview still discovers the same identical device twice,
once on the ip map and once in the new objects list. The router on the map
looks correct, if I could just eliminate the rediscovery of the item in the
"New Object Holding Area." Any ideas??
Thanks,
Andrea
Stephen Hochstetler <shochste@us.ibm.com> on 07/08/2003 02:31:33 PM
To: nv-l@lists.tivoli.com
cc:
Subject: Re: [nv-l] Discovering duplicate routers
Did those new interfaces have a separate name in the DNS? Did the new
routers reflect that new name? Would it be possible to resolve all 4
interfaces to the same hostname? Try that with one router and rediscover
it. It should fix the problem.
Stephen Hochstetler shochste@us.ibm.com
International Technical Support Organization at IBM
Office - 512-838-6198 (t/l 678) FAX - 512-838-6931
http://www.redbooks.ibm.com
Andrea_Martino@Pe
pBoys.com To:
nv-l@lists.tivoli.com
cc:
07/08/2003 01:22 Subject: [nv-l] Discovering
duplicate routers
PM
All,
We currently have 630 routers in our environment. All have been
discovered on our main IP map. Each router had 3 interfaces. Back several
months ago our communications team added another interface to each router
bringing the total to 4. The new interface was automatically added to the
router icon on the map, however, it created a new object in "New Object
Holding Area." The devices seem to be identical. If I delete one or both,
they are rediscovered in the same fashion. My temporary fix was to hide the
routers that were discovered in the "New Object Holding Area." This seems
to be working for now but I would like to fix this issue the correct way.
Any suggestions????
Thanks,
Andrea
Disclaimer: The information contained in this communication is confidential
and only for the use of the intended addressee(s). If you have received
this communication in error, any disclosure or use of such information is
strictly prohibited. Please notify the sender immediately and destroy all
copies. Thank you.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
Disclaimer: The information contained in this communication is confidential
and only for the use of the intended addressee(s). If you have received
this communication in error, any disclosure or use of such information is
strictly prohibited. Please notify the sender immediately and destroy all
copies. Thank you.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|