RE: [nv-l] Altiga MIBS / TRAPS (read: Cisco VPN Concentrator)

["Davis, Donald" <donald.davis@firstcitizens.com>]

Scott,
I think what you are looking for may be in this mib:
CISCO-IPSEC-FLOW-MONITOR-MIB-V1SMI.my

This was downloaded from the cisco ftp site.
I fixed a syntax error on line 135 that NetView would not compile.
IPSIpAddress ::= OCTET STRING(SIZE(4 | 16))
NetView would not compile it with the spaces around the bar.

I queried my Cisco 3000 with it and was able to retrieve tunnel status
cipSecTunnelTable.cipSecTunnelEntry.cipSecTunIkeTunnelAlive.9663 : True

Don Davis
First Citizens Bank
Raleigh, NC.  27603-3526
 

-----Original Message-----
From: Barr, Scott [mailto:Scott_Barr@csgsystems.com]
Sent: Thursday, July 31, 2003 11:50 AM
To: nv-l@lists.tivoli.com
Subject: [nv-l] Altiga MIBS / TRAPS (read: Cisco VPN Concentrator)

Anyone have massaged versions of the Altiga MIBS that the Cisco 3030 VPN concentrator uses? And better yet, anyone have any trap documentation?

The core problem is I need to alert when the IPSEC tunnel is down. So I either need a trap or a mib variable to poll. Based on Cisco's response, I'm not sure either is possible. The tunnel is NOT an interface on the concentrator so the LinkUp/LinkDown traps don't report the status of a tunnel.

Here is what Cisco gave me back on a TAC case:

<
Problem Description:  Where can I find details on what traps the VPN 3030 concentrator generates. In particular - when a IPSEC tunnel drops.

Please contact customer via email: scott_barr@csgsystems.com
>

The VPN concentrators have limited snmp support and not too many traps are supported by this device.

Please go to the following page and check all the mibs supported by the version of code your VPN 3030 is running. The newer code will include the mibs supported in prior codes.

Mib supported by VPN 3000 conenctrator
ftp://ftp.cisco.com/pub/mibs/supportlists/vpn3000/vpn3000-supportlist.html

Next go to the following page and click on the mibs that are present in the previous link .i.e that are supported by VPN 3030 and that is present on this traps page.

The mibs that are not present on this second link means that it does not have any traps.

Snmp traps in mibs
ftp://ftp.cisco.com/pub/mibs/traps

You can use

http://jaguar.ir.miami.edu/~marcus/snmptrans.html

translate and lookup mib definitions.

AFAIK,  it only sends standard MIB-II traps like linkDown, linkUp etc,  but you can also send VPN3000 Events
as SNMP traps (these Events are NOT defined in any MIBs).  So the Altiga MIBs don't actually have any traps defined.

Verify the VPN3000 SNMP configuration.

Reference Volume I:

http://www.cisco.com/univercd/cc/td/doc/product/vpn/vpn3000/4_0/index.htm

Configuration | System | Management Protocols | SNMP
Configuration | System | Events | General
Events to Trap
Configuration | System | Events | Classes
Configuration | System | Events | Trap Destinations

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)

 

------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.
==============================================================================

CISCO-IPSEC-FLOW-MONITOR-MIB-V1SMI.my
Description: Binary data

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)