thanks for this... I changed the.cds file and now I'm expecting the
results..
can I ask you something more? do you know if future version on netview @
Windows / Linux will have one of these:
- full MLM configuration support
- RIM support
- native client support (Linux )
thanks a lot!
lucian
James Shanks wrote:
The origin field from the NetView for Windows TEC adapter, when mapped
to the default value of $SOURCE_ADDR in the tecad_nv6k.cds, is broken.
It has been for some time.
There is an APAR for this, PJ29055, and it will be fixed in 7.1.4. I
don't know to whom in Level 3 you consulted, Brian, but it was not me,
and such issues are usually mine. I am sorry that your call was not
properly routed nor resolved.
As a workaround, I would alter your default mapping to $AGENT_ADDR,
which is a better match in most cases, until a fix is available. In
those cases where $AGENT_ADDR does not work, you will have to live
without an origin value. It may that in the future the 7.1.4 fix
will be ported retroactively to the next FixPack for 7.1.3, but that
remains to be seen. For now you will just have to accept the fact
that it is broken and work around it.
Hope this helps
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
*Brian Kraftchick <Brian.Kraftchick@odfl.com>*
09/03/2003 08:15 AM
To: "NVList (E-mail)" <nv-l@lists.tivoli.com>
cc:
Subject: RE: [nv-l] origin=212.252.18.0
Lucian,
I have had the exact same issue since our installation of Netview by IBM
Global Services, and it has yet been resolved. We have a different IP
address show up than yours, but still it has nothing to do with our
network,
nor any configured device on our network. I have actually taken this all
the way to Level 3 with Tech Support, but still no solution. We were able
to determine that it does come directly from NetView....when we check the
TEC reception log...the IP address is already there, so we know that TEC
isn't generating it. Something within TEC is....but as I said, we still
don't have any solution whatsoever....please let me know if you find
anything out.
Brian
-----Original Message-----
From: tivoli [mailto:tivoli@bu.brauunion.ro]
Sent: Wednesday, September 03, 2003 6:01 AM
Cc: Netview List
Subject: [nv-l] origin=212.252.18.0
hi there list!
I have some events from NetView that appear in TEC with origin
212.252.18.0
what this could be? (I have a second NIC on netview server without an
address... )
thanks
Lucian
-
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|