Hi,
The Switch goes marginal if a Device attached to it is down. Check with
Impact Analysis if you have a device there which is down.
note that you only see the Yellow Switch in the Topo-View not on Smartsets
- they always show the IP-Status of an Object.
I think there is a Fix for it , if ITSA is not able to color the
switch.(PJ28992) something with nvdbtools......
"Westphal, Raymond W" <Raymond.W.Westphal@erac.com>@lists.us.ibm.com on
01.10.2003 22:19:59
Please respond to nv-l@lists.us.ibm.com
Sent by: owner-nv-l-digest@lists.us.ibm.com
To: <nv-l@lists.tivoli.com>
cc:
Subject: [nv-l] Understanding ITSL2 Node Marginal Trap
Hello Everyone,
NetView 7.1.3 on AIX 5.2 and experimenting with with ITSL2 Version 1.2.1.
I'm receiving switch analyzer node marginal traps from several 29xx series
switches. And the switch does NOT change to marginal (yellow) status. Below
is an example:
1065037619 3 Wed Oct 01 14:46:59 2003 switch1.abc.com V Node Marginal
[0.0.0.0/FastEthernet0/37, 0.0.0.0/FastEthernet0/28,
0.0.0.0/FastEthernet0/19, 0.0.0.0/FastEthernet0/17,
0.0.0.0/FastEthernet0/16]
I cannot find an explanation of the event message. When I telnet to the
switch, I cannot find any logs indicating problems for the ports listed. In
fact - no ports on the source swtich are reporting any problems.
There is nothing listed under "Impact Analysis" for the particular switch.
Are there any ITSL2 users who can explain the traps message?
Thanks in advance.
Ray Westphal
Enterprise Rent-A-Car
|