Re: [nv-l] Understanding ITSL2 Node Marginal Trap

[Milton.W.Bridges@kp.org]

As a newbie, where can I find IY40359 and/or IY48698.   Had no problem locating FixPack1, but having trouble locating the others.  Does anyone have the url for information/downloads on the interim fixes?

Thanks

-Milt

Milton W. Bridges III
Network Automation Systems Programmer
Kaiser Permanente IT National Operations
Enterprise Automation Services, Design and Engineering
(909)739-5339
8-395-5339

Becky Anderson <andersrs@us.ibm.com> Sent by: owner-nv-l-digest@lists.us.ibm.com 10/02/2003 07:49 AM Please respond to nv-l

To:        nv-l@lists.us.ibm.com         cc:        nv-l@lists.tivoli.com, owner-nv-l-digest@lists.us.ibm.com, Raymond.W.Westphal@erac.com         Subject:        Re: [nv-l] Understanding ITSL2 Node Marginal Trap

Ray, 

At times the color of the switch icon is incorrect when the switch is marginal.  There is an interim fix IY40359 for Unix, superseded by IY48698 as of 9/24,  that addressed this.   It fixes the occasional problem of inconsistent switch status colors between network and segment submaps.  This fix is required when using NetView 7.1.3 fixpack 1.  (By the way, do you have NetView fixpack 1 installed?  ITSA requires it.) 

You should also check the oper status of those ports listed in the NetView event you mentioned.  At the NetView GUI, highlight the switch and select Monitor-->Other-->Interfaces.  In addition check /usr/OV/ITSL2/log/poll_server.log for possible errors associated with these ports. 

----------------------------------------------
Becky Anderson
Technical Evangelist
Event Correlation and Automation
IBM Tivoli Software
andersrs@us.ibm.com  
office & fax 630 568 7030 (TL 994)
cell 630 240 2879    6302402879@mobile.att.net

"Westphal, Raymond W" <Raymond.W.Westphal@erac.com> Sent by: owner-nv-l-digest@lists.us.ibm.com 10/01/2003 03:19 PM Please respond to nv-l

To:        <nv-l@lists.tivoli.com>        cc:                Subject:        [nv-l] Understanding ITSL2 Node Marginal Trap

Hello Everyone,

NetView 7.1.3 on AIX 5.2 and experimenting with with ITSL2 Version 1.2.1.

I'm receiving switch analyzer node marginal traps from several 29xx series switches. And the switch does NOT change to marginal (yellow) status. Below is an example:

1065037619 3 Wed Oct 01 14:46:59 2003 switch1.abc.com V Node Marginal [0.0.0.0/FastEthernet0/37, 0.0.0.0/FastEthernet0/28, 0.0.0.0/FastEthernet0/19, 0.0.0.0/FastEthernet0/17, 0.0.0.0/FastEthernet0/16]

I cannot find an explanation of the event message. When I telnet to the switch, I cannot find any logs indicating problems for the ports listed. In fact - no ports on the source swtich are reporting any problems.
There is nothing listed under "Impact Analysis" for the particular switch.
 
Are there any ITSL2 users who can explain the traps message?
 
Thanks in advance.
 
Ray Westphal
Enterprise Rent-A-Car