Ok, Paul. i'll do it.
But i still dont know how to get them. I did not find any link...
Just mail an IBM support??
Thanks
-----Mensaje original-----
De: Paul Stroud [mailto:pstroud@bellsouth.net]
Enviado el: Miércoles, 26 de Noviembre de 2003 02:37 p.m.
Para: nv-l@lists.us.ibm.com
Asunto: Re: [nv-l] netmon and SNMP communities
The actual fixes you must obtain from support. I understand you looking at
the APARs and deciding they do not apply in your situation. While that may
be true, earlier APARs surely do these are just the latest revisions for
netmon and some of the snmp libraries . I am telling you, install these fixes
and your problem will be solved.
Paul
On Wednesday 26 November 2003 12:21, you wrote:
> Paul:
>
> I viewed the apars you told me:
>
> IY42241: INCCORECT SNMPADDRESS OF OBJECTS LOADED INTO NETVIEW THE LOADHOSTS
> COMMAND. This apar is about the loadhosts command which is not my case.
>
> IY49090: MODIFY THE ORDER OF SNMP REQUESTS DURING DISCOVERY TO ENSURE
> THEFIRST IS RETRIVED FROM "SYSTEM" OF MIB INFORMATION. This apar is not the
> case because I am not using alternate community names. The fact is that I
> get authentication failures.
>
> IY49975: IPMAP NEVER ENDS THE SYNCHRONIZATION AND CORES IF GLOBAL-ACK IS
> ENABLED. This is not the case.
>
> Thanks Paul, but these (although fixes to the 7.1.3 version) are not really
> the problem im having.
>
> But, in every case, where can I download these fixes???
>
> Thank you
>
>
> -----Mensaje original-----
> De: Paul Stroud [mailto:pstroud@bellsouth.net]
> Enviado el: Miércoles, 26 de Noviembre de 2003 01:41 p.m.
> Para: nv-l@lists.us.ibm.com
> Asunto: Re: [nv-l] netmon and SNMP communities
>
>
> Get these additional fixes and your problem should be resolved:
>
> IY42241
> IY49090
> IY49975
>
> Paul
>
> On Wednesday 26 November 2003 11:40, you wrote:
> > Paul:
> >
> > No, I didn't assign any communities to communityNames.conf becuase I
> > already imported the snmp configuration. I could try that, but it would
> > be a workaround. Since it is only a secondary Netview, i prefer to
> > reinstall it rather than having a faulty installation.
> >
> > Im running Netview for Linux 7.1.3 with Fixpack 01.
> >
> > thanks
> >
> >
> > -----Mensaje original-----
> > De: Paul Stroud [mailto:pstroud@bellsouth.net]
> > Enviado el: Miércoles, 26 de Noviembre de 2003 01:11 p.m.
> > Para: nv-l@lists.us.ibm.com
> > Asunto: Re: [nv-l] netmon and SNMP communities
> >
> >
> > Have you added any of these community names to the communityNames.conf
> > file? Also have you installed any patches? If so, which patches?
> >
> > Paul
> >
> > On Wednesday 26 November 2003 11:08, you wrote:
> > > Scott:
> > >
> > > First of all, thanks.
> > > I did as you told me to and got the netmon.trace, but it only shows the
> > > community used with already discovered nodes... The thing is that,
> > > because of my seed file ( !@oid 0), no nodes with communities other
> > > than the default were discovered, which are the ones I try to poll AND
> > > discover.
> > >
> > > -----Mensaje original-----
> > > De: Barr, Scott [mailto:Scott_Barr@csgsystems.com]
> > > Enviado el: Miércoles, 26 de Noviembre de 2003 11:57 a.m.
> > > Para: nv-l@lists.us.ibm.com
> > > Asunto: RE: [nv-l] netmon and SNMP communities
> > >
> > >
> > > During times of problem - use the netmon -a 175 command and look in
> > > /usr/OV/log/netmon.trace to see if the community name is different than
> > > the one reported in xnmsnmpconf. Thats the bug Leslie is referring to.
> > >
> > > -----Original Message-----
> > > From: owner-nv-l@lists.us.ibm.com
> > > [mailto:owner-nv-l@lists.us.ibm.com]On Behalf Of Leslie Clark Sent:
> > > Wednesday, November 26, 2003 8:42 AM To: nv-l@lists.us.ibm.com
> > > Subject: Re: [nv-l] netmon and SNMP communities
> > >
> > >
> > >
> > > Do you have maintenance on this 7.1.3? There were problems with
> > > communities that were fixed.
> > >
> > > Cordially,
> > >
> > > Leslie A. Clark
> > > IBM Global Services - Systems Mgmt & Networking
> > > Detroit
> > >
> > >
> > >
> > > "Federico Vidal" <fvidal@tecsystem.com.ar>
> > > Sent by: owner-nv-l@lists.us.ibm.com
> > >
> > >
> > > 11/26/2003 12:16 PM
> > > Please respond to nv-l
> > >
> > >
> > >
> > > To: "Nv-L (E-mail)" <nv-l@lists.us.ibm.com>
> > > cc:
> > > Subject: [nv-l] netmon and SNMP communities
> > >
> > >
> > >
> > >
> > > Hello List:
> > >
> > > I have a customer with Netview 7.1.3 on Linux who tries to discover his
> > > network with it. The thing is that, having a seed file that only
> > > discovers SNMP devices ( !@oid 0 ), he can't discover any device beside
> > > the ones using the default community. Any device that has another SNMP
> > > community different than the default, can't be discovered.
> > >
> > > I will give full details: Looking into the matter, i found that the
> > > SNMP configuration (xnmsnmpconf) is correct because I can manually poll
> > > these devices using snmpwalk without specifying community. I found that
> > > netmon is the one who is using wrong communities to poll because the
> > > cisco agents in the network keep telling that netview causes
> > > authentication failure, thus netview doesnt discover any device due to
> > > the seed file.
> > >
> > > This is very strange to me, because i thought that the netview engine
> > > used the same snmp configuration that CLI commands.
> > >
> > > Another detail is that before this problem occurred, my customer
> > > changed the netview's IP address, so I ran reset_ci to solve the
> > > apparent problem but nothing happenned....
> > >
> > > What could be happening???? My last resort is to deinstall but I would
> > > like to solve this issue as a Netview supporter.
> > >
> > > Thanks in advance.
> > >
> > > Federico Vidal
> > > IBM Certified Deployment Professional
> > > Tecsystem S.R.L.
> > > e-mail: fvidal@tecsystem.com.ar
> > > Tel: (5411)-4814-2770 ext. 120
|