|
Yes,
it is 7.1.3 with Fixpack 1 installed.
Thanks
Federico Vidal
IBM
Certified Deployment Professional
Tecsystem
S.R.L.
e-mail: fvidal@tecsystem.com.ar
Tel: (5411)-4814-2770 ext. 120
Do you have maintenance on this 7.1.3? There were
problems with communities that were fixed.
Cordially,
Leslie A.
Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
|
| "Federico Vidal"
<fvidal@tecsystem.com.ar>
Sent by: owner-nv-l@lists.us.ibm.com
11/26/2003 12:16 PM
Please respond to nv-l
|
To:
"Nv-L (E-mail)" <nv-l@lists.us.ibm.com>
cc:
Subject: [nv-l] netmon
and SNMP communities
|
Hello List:
I have a customer with Netview
7.1.3 on Linux who tries to discover his network with it. The thing is that,
having a seed file that only discovers SNMP devices ( !@oid 0 ), he can't
discover any device beside the ones using the default community. Any device
that has another SNMP community different than the default, can't be
discovered.
I will give full details: Looking into the matter, i found
that the SNMP configuration (xnmsnmpconf) is correct because I can manually
poll these devices using snmpwalk without specifying community. I found that
netmon is the one who is using wrong communities to poll because the cisco
agents in the network keep telling that netview causes authentication failure,
thus netview doesnt discover any device due to the seed file.
This is
very strange to me, because i thought that the netview engine used the same
snmp configuration that CLI commands.
Another detail is that before
this problem occurred, my customer changed the netview's IP address, so I ran
reset_ci to solve the apparent problem but nothing happenned....
What
could be happening???? My last resort is to deinstall but I would like to
solve this issue as a Netview supporter.
Thanks in
advance.
Federico Vidal
IBM Certified Deployment
Professional
Tecsystem S.R.L.
e-mail: fvidal@tecsystem.com.ar
Tel:
(5411)-4814-2770 ext.
120
|