Nicolas,
You are welcome. :-)
Do not cut and paste in a SmartSet.
You should modify the rule for the SmartSet to add or delete nodes in the
SmartSet.
If you have a DBA background, think of a SmartSet as a view (via where clause)
for a table.
Raymond
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On
Behalf Of Nicolas DE VAUX BIDON
Sent: Thursday, December 18, 2003 3:18 AM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Netview 7.1.3 nvdbformat problem
Thank you raymond, that work fine :)
Another question :
When i add manually a node in a smartset (cut & paste), it doesn't appear in my
request with nvdbformat ?
It seems that only nodes added by the rule of the smartset appear on the output
(with a SELECTRULE:SmartSet=my)
Is it normal ?
---------- Original Message ----------------------------------
From: "Erdey, Raymond M" <Raymond.M.Erdey@erac.com>
Reply-To: nv-l@lists.us.ibm.com
Date: Wed, 17 Dec 2003 08:21:57 -0600
>Nicolas,
>
>Try "SNMP ipAddress" instead of "IP Address".
>
>Raymond Erdey
>Enterprise Rent-A-Car
>System Administrator
>Network Management System Administration
>Email: raymond.m.erdey@erac.com
>Web: http://www.geocities.com/rerdey/
>
>
>-----Original Message-----
>From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On
>Behalf Of Nicolas DE VAUX BIDON
>Sent: Tuesday, December 16, 2003 4:30 PM
>To: nv-l@lists.us.ibm.com
>Subject: [nv-l] Netview 7.1.3 nvdbformat problem
>
>
>I experience some trouble to do a simple extraction with nvdbformat.
>
>I have to simply extract from database hostame and IP address of nodes of a
>SmartSet...
>
>I use :
>
>SELECTRULE:SmartSet=MySmartset
>SELECTFIELD:1:IP Hostame
>SELECTFIELD:2:IP Address
>
>unfortunatly, the ouput give me correctly hostnames, but instead of IP
>adresses, i had "Null"...
>
>When I use SELECTRULE:Interface=TRUE, i can obtain the IP adress by the same
>SELECTFIELD, but not with a smartset... Is it normal ?
>
>
>
>
|