Federico, then if new node discovery is set to discover new nodes
every 5 minutes it will do it more often than if we let NV to do it
when it estimates convinient(at automatic intervals)?
What is done in autodicovery?, polling the arp table of SNMP
supporting nodes? routing table?
In the configuration polling will NV try to SNMP all nodes even those
that right now does not support SNMP? This qusetion comes from the idea
that a non-SNMP node could change to support SNMP after it is
discovered.
Thanks
Inaki
Quoting Federico Vidal <fvidal@tecsystem.com.ar>:
> Hi, besides Netview's Status Polling (defualt 5m), Configuration
> polling (24 hours), there's another type of polling and it is the
> discovery polling. This one occurs initially after 2 hours, but then
> it self adjusts depending the amount of changes done recently to the
> network topology. For example, if it detects many changes, polling
> interval is shorter; in the same manner, if changes are rare, polling
> interval is larger.
>
> Regards
>
> Federico Vidal
> IBM Certified Deployment Professional
> Tecsystem S.R.L.
> e-mail: fvidal@tecsystem.com.ar
> Tel: (5411)-4814-2770 ext. 120
>
>
>
> -----Mensaje original-----
> De: igastelu@unm.edu [mailto:igastelu@unm.edu]
> Enviado el: Miércoles, 07 de Enero de 2004 06:48 p.m.
> Para: nv-l@lists.us.ibm.com
> Asunto: [nv-l] SNMP status polling
>
>
> Hi list, I am running NV 7.1.3 for NT, in the Polling options I
> have
> Set SNMP default option to poll for status(5 min).
> In this list I have read (Leslie Clark) that when a node does not
> support SNMP, the status polling uses ICMP code get address mask (if
>
> already up) or ICMP echo request(if down).
> My question is how often will NV try to do an SNMP get to this
> node,
> is it in the node configuration polling (every 24 hours)?
> I have poll to discover new nodes every 5 min.
>
>
> Thanks for your help
>
>
>
>
|