I have tried this and numerous other
wildcard entries. Nothing seems to work. Could the network group be blocking
any of this traffic at the routers?
What is the difference in the traffic from
discovery to specific IPs?
Thanks
-----Original Message-----
From: Michael Webb
[mailto:mlwebb@us.ibm.com]
Sent: Wednesday, January 28, 2004
3:33 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] netmon.seed
file
Try adding one
specific IP address per subnet as an initial seed entry such as:
10.60.180.x
where x is a valid IP address
(like a router)
If that does not help to get
that subnet discovered, then try a different syntax for your range, like
10.60.180.1-255
instead of 10.60.180.*.
Regards,
Michael Webb, IBM Tivoli
Q1CA Distributed NetView / ITSA SVT
Email: mlwebb@us.ibm.com
Ext: (919) 224-1410, T/L: 687-1410
"Kevin
Campbell" <kcampbell@tgen.org>
|
|
"Kevin
Campbell" <kcampbell@tgen.org>
Sent by:
owner-nv-l@lists.us.ibm.com
01/28/2004 05:24 PM
Please respond to nv-l
|
To:
<nv-l@lists.us.ibm.com>
cc:
Subject: RE: [nv-l] netmon.seed
file
|
Yes. I have also added one and more of the routers into the seed
file as well. Still no luck
AIX 5.1
Netview
7.1.3 (fixpack 1 and 2)
-----Original Message-----
From: Barr, Scott [mailto:Scott_Barr@csgsystems.com]
Sent: Wednesday, January 28, 2004 2:48 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] netmon.seed file
Have you
tried pinging a router within one of those subnets while discovery is running?
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On Behalf Of Kevin Campbell
Sent: Wednesday, January 28, 2004 3:31 PM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] netmon.seed file
I have tried a number of
configurations but can not get it to discover devices the way I want them to. I
have a number of subnets that I manage, lets say (10.60.180.*-10.60.190.* and
10.60.120.*-10.60.132.*). I would lick to have netmon auto discover anything on
these subnets. The only way I can get the devices to show up is to add each
device into the seed file. How can I get the devices to be auto discovered. I
have tried what the config docs say making my netmon.seed file look this:
10.60.180-190.*
10.60.120-132.*
But the only thing that gets
discovered is the Netview server and the default route. I have tried a number
of others for example:
10.60.180.*
10.60.181.*
10.60.182.*
…and so on
But nothing other than
specific IPs seem to be working
Any advice would be great
Thanks
KevinC