I just tried manage/unmanage and it failed without a R/W map up even
though netviewd is running. See below:
root [s00cXXX/usr/scripts]#
nvmaputil.sh --manage-node sxa-lisbon-px-xxa51
There is no read/write
map opened whose map name is "default".
root [s00cXXX/usr/scripts]#
ps -ef |grep netviewd
root 17288 27618 2
15:07:23 pts/0 0:00 grep netviewd
root 23616 34202
0 18:06:20 - 1:57 /usr/OV/bin/netviewd
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of Bursik, Scott {PBSG}
Sent: Thursday, February 05, 2004 2:49 PM
To: 'nv-l@lists.us.ibm.com'
Subject: RE: [nv-l] nvmaputil / Web Device Mgmt
I have not found this to be the case. I just opened a RO map and have
netviewd running and nvmaputil works fine. There is no RW map open by a
user. I was able to unmamage a node and verify it with a ovobjprint -s
and
then manage it again.
Scott Bursik
Enterprise Systems Management
PepsiCo Business Solutions Group
(972) 963-1400
scott.bursik@pbsg.com
-----Original Message-----
From: Francois Le Hir [mailto:flehir@ca.ibm.com]
Sent: Thursday, February 05, 2004 1:24 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] nvmaputil / Web Device Mgmt
Fawad,
1- I have noticed the same. If a RO map is opened, nvmaputil will
always
fail, even if netviewd is also running with a RW map. It looks like
nvmaputil will use the ovw (the opened map) instead of netviewd
whenever
ovw is running. And of course the update will not happen if the map
used by
nvmaputil is in RO mode.
2- I believe the web device management is when you define an URL for
the
management of a device (see the W option in oid_to_type)
Salutations, / Regards,
Francois Le Hir
Network Projects & Consulting Services
IBM Global Services
Phone: (514) 205 6695
"Qureshi,
Fawad"
<Fawad.Qureshi@ss
a.gov> To
Sent by: "'nv-l@lists.us.ibm.com'"
owner-nv-l@lists.
<nv-l@lists.us.ibm.com>
us.ibm.com
cc
Subject
02/05/2004 01:56 [nv-l] nvmaputil /
Web Device Mgmt
PM
Please respond
to
nv-l
NV 7.1.3 / AIX 5.1
Couple of questions:
1. Nvmaputil.sh will fail if map is not up in R/W mode, even with
netviewd running. I was told it would work if netviewd was
running. I
have tried netviewd in both ro and rw mode.
2. I posted this before but got no response. Does anyone know what Web
Device Mgmt option under Tools is for? I find no doc on this
feature.
Issue is this: We have several devices that can be configured via
web
browser; it's basically a SNMP SET operation. I have all the MIBs
loaded and can do individual SETs on individual devices via the
MIB
Browser. I was hoping there was a way to invoke an app from
Netview
(web console) that can display this type of devices and do
collective
SETs on them.
Thanks.
Cheers
Fawad Qureshi