RE: [nv-l] nvmaputil / Web Device Mgmt

[James Shanks <jshanks@us.ibm.com>]

It tells you right there that your R/W map has to have the name "default".  

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group

"Qureshi, Fawad" <Fawad.Qureshi@ssa.gov> Sent by: owner-nv-l@lists.us.ibm.com 02/05/2004 03:11 PM Please respond to nv-l

To:        "'nv-l@lists.us.ibm.com'" <nv-l@lists.us.ibm.com>         cc:                 Subject:        RE: [nv-l] nvmaputil / Web Device Mgmt

I just tried manage/unmanage and it failed without a R/W map up even though netviewd is running. See below:
 
root [s00cXXX/usr/scripts]# nvmaputil.sh --manage-node sxa-lisbon-px-xxa51
There is no read/write map opened whose map name is "default".
root [s00cXXX/usr/scripts]# ps -ef |grep netviewd
    root 17288 27618   2 15:07:23  pts/0  0:00 grep netviewd 
    root 23616 34202   0 18:06:20      -  1:57 /usr/OV/bin/netviewd
 
 
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of Bursik, Scott {PBSG}
Sent: Thursday, February 05, 2004 2:49 PM
To: 'nv-l@lists.us.ibm.com'
Subject: RE: [nv-l] nvmaputil / Web Device Mgmt
 
I have not found this to be the case. I just opened a RO map and have
netviewd running and nvmaputil works fine. There is no RW map open by a
user. I was able to unmamage a node and verify it with a ovobjprint -s and
then manage it again.
 
 
Scott Bursik
Enterprise Systems Management
PepsiCo Business Solutions Group
(972) 963-1400
scott.bursik@pbsg.com
 
 
 
-----Original Message-----
From: Francois Le Hir [mailto:flehir@ca.ibm.com] 
Sent: Thursday, February 05, 2004 1:24 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] nvmaputil / Web Device Mgmt
 
Fawad,
 
1- I have noticed the same. If a RO map is opened, nvmaputil will always
fail, even if netviewd is also running with a RW map. It looks like
nvmaputil will use the ovw (the opened map) instead of netviewd whenever
ovw is running. And of course the update will not happen if the map used by
nvmaputil is in RO mode.
 
2- I believe the web device management is when you define an URL for the
management of a device (see the W option in oid_to_type)
 
Salutations, / Regards,
 
Francois Le Hir
Network Projects & Consulting Services
IBM Global Services
Phone: (514) 205 6695
 
 
                                                                           
             "Qureshi, Fawad"                                              
             <Fawad.Qureshi@ss                                             
             a.gov>                                                     To 
             Sent by:                  "'nv-l@lists.us.ibm.com'"           
             owner-nv-l@lists.         <nv-l@lists.us.ibm.com>             
             us.ibm.com                                                 cc 
                                                                           
                                                                   Subject 
             02/05/2004 01:56          [nv-l] nvmaputil / Web Device Mgmt  
             PM                                                            
                                                                           
                                                                           
             Please respond to                                             
                   nv-l                                                    
                                                                           
                                                                           
 
 
 
 
NV 7.1.3 / AIX 5.1
 
Couple of questions:
 
   1. Nvmaputil.sh will fail if map is not up in R/W mode, even with
      netviewd running. I was told it would work if netviewd was running. I
      have tried netviewd in both ro and rw mode.
 
   2. I posted this before but got no response. Does anyone know what Web
      Device Mgmt option under Tools is for? I find no doc on this feature.
      Issue is this: We have several devices that can be configured via web
      browser; it's basically a SNMP SET operation. I have all the MIBs
      loaded and can do individual SETs on individual devices via the MIB
      Browser. I was hoping there was a way to invoke an app from Netview
      (web console) that can display this type of devices and do collective
      SETs on them.
 
Thanks.
 
Cheers
 
Fawad Qureshi