nv-l
[Top] [All Lists]

Re: [nv-l] RE: Location.conf

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] RE: Location.conf
From: "Alan E. Hennis" <Hennis_Alan_E@cat.com>
Date: Thu, 19 Feb 2004 13:50:19 -0600
Delivery-date: Thu, 19 Feb 2004 20:33:02 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
Christopher

Thanks for the update. It is good to know that 255 is also valid.

IBM, If you are listening perhaps the NetView documentation can be changed
to reflect this. Or is this new to V7.1.4 as I only have V7.1.3.

Thanks
Alan E. Hennis
Caterpillar Inc.
Systems+Process Division
309.494.3308
hennis_alan_e@cat.com


                                                                                
                                                 
                      "Christopher J                                            
                                                 
                      Petrina"                                                  
                                                 
                      <cjp8@meadwestvac                                         
                                                 
                      o.com>                                                    
                                                 
                      Sent by:          To: nv-l@lists.us.ibm.com               
                                                 
                      owner-nv-l@lists. cc:                                     
                                                 
                      us.ibm.com                                                
                                                 
                                                                                
                                                 
                                                                                
                                                 
                      02/19/2004 01:26    Subject:      Re: [nv-l] RE: 
Location.conf                                             
                      PM                                                        
                                                 
                      Please respond to                                         
                                                 
                      nv-l                                                      
                                                 
                                                                                
                                                 
                                                                                
                                                 



Caterpillar: Confidential Green                 Retain Until: 03/20/2004
                                                Retention Category:  G90 -
                                                General
                                                Matters/Administration





255 or 0 is capable of being used.   I ahve loaded the fix they sent me.
And beleive this has cured the issue.

-Chris Petrina

                                                                         
     "Alan E. Hennis"                                                    
     <Hennis_Alan_E@cat.com>                      To:                    
     Sent by: owner-nv-l@lists.us.ibm.com nv-l@lists.us.ibm.com          
                                                  cc:                    
                                                  Subject:        Re:    
     02/19/2004 01:13 PM                  [nv-l] RE: Location.conf       
     Please respond to nv-l                                              
                                                                         






Why are you using 255 as the address pattern?

     EUROPE_ATT_EVPN 255 SITE
      Mauepas 1.1.1.1 Site EUROPE_ATT_EVPN

The documentation in location.conf use a 0.

     # Location symbols can be used just for placeholders, in which case
you may
     # specify 0 as the address pattern.  In the following example, the
'Tivoli'
     # location is simply used to hold other locations:
     #            Tivoli 0 State
     #            SalesOffices 146.84 "S. America" Tivoli
     #            "Development Offices" 146.92 City Tivoli

Also try clearing /usr/OV/log/location.log (i.e cp /dev/null
/usr/OV/log/location.log). Then look at the log to see any problems with
location.conf.


Thanks
Alan E. Hennis
Caterpillar Inc.
Systems+Process Division
309.494.3308
hennis_alan_e@cat.com



                     "Christopher J

                     Petrina"

                     <cjp8@meadwestvac

                     o.com>

                     Sent by:          To: nv-l@lists.us.ibm.com

                     owner-nv-l@lists. cc:
                     us.ibm.com



                     02/19/2004 10:26    Subject:      Re: [nv-l] RE:
Location.conf
                     AM

                     Please respond to

                     nv-l






Caterpillar: Confidential Green                 Retain Until: 03/20/2004
                                               Retention Category:  G90 -
                                               General
                                               Matters/Administration





Just exited the GUI,
edited the location.conf file to add two new lcoations into the map

EUROPE_ATT_EVPN 255 SITE
Mauepas 1.1.1.1 Site EUROPE_ATT_EVPN

Neither of the sites show up on the map after I restart the GUI.

-Chris Petrina
P.S. Currently the support team is telling me that the IY48698 APAR fix
cannot be ordered.





________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service._______________________________________________________________







<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web