I don’t
know what your set up is, but if it is similar to ours then here is a possibility
for the connection lost issue (# 3). In our setup I am the only person who runs
the native console and everyone else runs the web console. Every time the map
on the native console is started or exited the web console users will see the
error that you described.
For number
2 have you tried running the maintenance commands /usr/OV/bin/mapcount –a,
/usr/OV/bin/ovstop netmon, /usr/OV/bin/ovtopofix –a? These are the aix
commands. I don’t know if the windows commands are in the same locations or not.
Just a guess, but maybe something is corrupted in your database.
Debra L. Klingensmith
Network Specialist
Allegheny Energy
phone: (724) 830-5881
email:
dkling2@alleghenyenergy.com
-----Original
Message-----
From: Michael Webb
[mailto:mlwebb@us.ibm.com]
Sent: Tuesday, March 30, 2004
12:17 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] web console
For question number 3 regarding a lost connection, here is a
possibility. In our lab setup, we pull cables all the time to simulate
network outages. This will cause the message to be displayed stating that
the connection to the web server has been lost. So when the routed path
between the web console machine and the NetView server machine is down, then
the actual connection from the web console to the web server is lost, resulting
in the message.
Michael Webb,
IBM Tivoli
Q1CA Distributed NetView / ITSA SVT
Email: mlwebb@us.ibm.com
Ext: (919) 224-1410, T/L: 687-1410
"Qureshi,
Fawad" <Fawad.Qureshi@ssa.gov>
|
|
"Qureshi, Fawad" <Fawad.Qureshi@ssa.gov>
Sent by: owner-nv-l@lists.us.ibm.com
03/30/2004 11:47 AM
Please respond to nv-l
|
To: "'nv-l@lists.us.ibm.com'"
<nv-l@lists.us.ibm.com>
cc:
Subject: RE: [nv-l] web console
|
No takers for this question?
I will settle for an answer to question 2 only. This one's bugging
the heck out of me.
Come on you web console gurus ...
Thanks all.
Cheers
Fawad
-----Original
Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of Qureshi, Fawad
Sent: Monday, March 29, 2004 6:04 PM
To: 'nv-l@lists.us.ibm.com'
Subject: [nv-l] web console
NV 7.1.3 / AIX 5.1
1. Top level
icons (SmartSet / IP Internet / ManagerSubmap) all disappear after running ok
for about four hours.
2. I was unable to find any doc that
explains the different map options that are available to choose from while
opening a map through web console client. I usually get four or five options
for map "default" to open, 2
or 3 in RO and 1 or 2 with RW - all on different ports. We only have
one map - "default".
3. Sometime the map disappears with message
displayed saying connection to web server lost. Why does that happen? How to
stop it from happening?
Cheers
Fawad
Qureshi