see if you don't have several maptree daemon still running (you should have
just one). I have seen this on 7.1.3 and 7.1.4 and when opening the web
console it looks like the map is opened twice. You need to kill the wrong
maptree (kill -9 is required) to solve the issue.
Salutations, / Regards,
Francois Le Hir
Network Projects & Consulting Services
IBM Global Services
Phone: (514) 205 6695
Jim.Federline@met
riscompanies.com
Sent by: To
owner-nv-l@lists. nv-l@lists.us.ibm.com
us.ibm.com cc
Subject
03/30/2004 07:34 Re: [nv-l] web console
PM
Please respond to
nv-l
Fawad wrote:
"I usually get four or five options for map default to open, 2 or 3 in RO
and 1 or 2 with RW - all on different ports. "
Jane Curry wrote:
"If you are saying that there are
apparently 2 RW connections to the map called Default available to
connect to, then I think you have a problem and I would call support."
I've seen this, too. NV 7.1.3 and 7.1.4 on AIX 5.1, two different systems.
Recycling all the Netview daemons clears it up everytime. Hasn't been
bothersome enough to open a ticket, everything keeps right on chugging
regardless.
--
James B. Federline
Metris Companies, Inc.
10900 Wayzata Blvd.
Minnetonka, MN 55305
E-Mail: jim.federline@metriscompanies.com
Direct: 952.358.4043
Main: 952.525.5020
Fax: 952.417.5686
Mobile: 763.286.5381
-----owner-nv-l@lists.us.ibm.com wrote: -----
To: nv-l@lists.us.ibm.com
From: Jane Curry <jane.curry@skills-1st.co.uk>
Sent by: owner-nv-l@lists.us.ibm.com
Date: 03-30-2004 12:36 PM
Subject: Re: [nv-l] web console
Qureshi, Fawad wrote:
> NV 7.1.3 / AIX 5.1
>
>
>
> 1. Top level icons (SmartSet / IP Internet / ManagerSubmap) all
> disappear after running ok for about four hours.
>
This may well be a consequence of 3
> 1.
>
>
> 2. I was unable to find any doc that explains the different map
> options that are available to choose from while opening a map
> through web console client. I usually get four or five options
> for map default to open, 2 or 3 in RO and 1 or 2 with RW - all
> on different ports.
>
The web console can attach to any ovw process (native NetView console)
ot to any netviewd daemon (it is possible to have more than one netviewd
running). The RW or RO will be the permissions that the ovw / netviewd
process has on the map they have open. If you are saying that there are
apparently 2 RW connections to the map called Default available to
connect to, then I think you have a problem and I would call support. I
have seen problems in the past with netviewd "half" being there but this
may have been fixed.
> 1. Sometime the map disappears with message displayed saying
> connection to web server lost. Why does that happen? How to stop
> it from happening?
>
As previously suggested, this could be physical comms or it could be
that the jetty webserver process has died or been stopped on the NetView
server.
Cheers,
Jane
>
>
> **Cheers **
>
> ** **
>
> **Fawad Qureshi**
>
>
>
--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2004 Jane Curry . All rights reserved.
|