RE: [nv-l] Events Workspace in NV 7.1.3

["Qureshi, Fawad" <Fawad.Qureshi@ssa.gov>]

You need to specify the Workspace Title every time you open the dynamic workspace. It is not saved for you.

 

No need to put the ruleset in ESE.automation if you only want to use it for dynamic workspace.

 

Cheers

 

Fawad Qureshi

 

 

-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of Meyos Yemveng
Sent: Wednesday, April 07, 2004 10:20 AM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Events Workspace in NV 7.1.3

 

NV 7.1.3 FP2, SOLARIS

Thanks William, James and Jane ..

I did succesfully create a Dynamic Workspace displaying Events and Traps from a given type of devices using the Ruleset.

 

I have name one Workspace "CISCO_EVENTS"

But now, when Closing and re-opening the Clients GUI, I notice the following:

1- Some Workspace Do not re-open with their original name (CISCO_EVENTS for Example), instead the have the name "events"

at the end you have more than one "events" workspace beside the default "events" workspace

 

2- Should I include my ruleset names in the ESE.automation file?

 

"Stringfellow, William" <William.Stringfellow@bankofamerica.com> wrote:

Meyos,

    All of this can be done with a smartset.  If you use Cisco as an example, the basic breakdown of their devices is:

Cisco = 1.3.6.1.4.1.9

routers = 1.3.6.1.4.1.9.1

switches = 1.3.6.1.4.1.9.5

 

    Because of acquisitions, there are other OIDs that belong to them, but you can expand this example to include whatever you want

 

Question 1 -  Make a  smartset who's membership rule is sysObjectId = <your desired targets OID>

 

Question 2 - Make a ruleset that blocks all events except those coming from members of your smartset in #1.  Then when you open your event window, create a dynamic workspace that uses this ruleset.  Or use this ruleset as the default for the event window itself.  Jane's last message told you how to save those for your customer.

 

Question 3 - The sysObjectId and the EnterpriseId are related but different.  If you look at my Cisco example, the OID that stops at 4.1.9 is the Enterprise Id, and as you can see, they add subsets to it by adding additional numbers, 4.1.9.1 for routers, 4.1.9.5 for switches.  Then they add additional numbers to each of these to identify specific router and switch types.  For examples look in /usr/OV/conf/C/oid_to_sym file

Here are some examples.  These are sysObjectIds.

 

1.3.6.1.4.1.9.1.122:Cisco Router:cisco-Rtr3620Family
1.3.6.1.4.1.9.1.123:Cisco Router:CPA3600     # cpa3620
1.3.6.1.4.1.9.1.124:Cisco Router:CPA3600     # cpa3640
1.3.6.1.4.1.9.1.125:Cisco Router:cisco-C7200
1.3.6.1.4.1.9.1.126:Cisco Router:cisco-Rtr700Family
1.3.6.1.4.1.9.1.127:Cisco Router:cisco-Rtr700Family
1.3.6.1.4.1.9.1.128:Cisco Router:cisco-Rtr700Family

Question 4 - Just make your smartset stop at the Enterprise id.  If a vendor uses more then 1 Enterprise id, just include all of them in the qualifying rule for the smartset.  Again in the case of Cisco, you would just say

 "anything whose sysObjectId included 1.3.6.1.4.1.9 AND <Any Other sysObjectId They Own>"

 

    Hope this helps, Good luck!

 

        Bill

 

Bill Stringfellow
EDS - Bank of America Account Team
Network Management Support
CA4-704-02-03
2000 Clayton Road, Building D
Concord, CA 94520

Office:     925.692.7283
Fax:        925.675.1763
Email:     william.stringfellow@eds.com
Cell:       925.765.2648

-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On Behalf Of Meyos Yemveng
Sent: Tuesday, April 06, 2004 8:04 AM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Events Workspace in NV 7.1.3

Thanks Jane,

I am having a problem about the event matching configuration.

 

1- I want to create a workspace for a specific device type with sysObjectID = 1.3.6.1.4.1.xx.yy.zz for example

2- I want All events (Treshold, Node UP, Node Down, etc ..) and All Traps from that Device type to be displayed on that Workspace

 

3- What Attributes represents  the sysObjectID? is it the EntrepriseID?

 

4- What about when  you want to display events from all Devices from the same vendor, can youu use "Greater or equal to" selection?

 

5- Any suggestions

 

6- any *.rs file sample would help.

 

 

 

Thank You,
Meyos
"ALLEZ LES LIONS INDOMPTABLES"

 

---

Post your free ad now! Yahoo! Canada Personals

Thank You,
Meyos
"ALLEZ LES LIONS INDOMPTABLES"

 

---

Post your free ad now! Yahoo! Canada Personals