|
Do you mean you have to:
1- have your predifine "Location" in the location.conf
2- run the script
3- then replace the old location.conf by the newly created location.conf
Q1: Does this mean this script cannot be used for a not partitioned Map?
Paul <pstroud@bellsouth.net> wrote:
Scott,
I got the file and looking at the script it is looking for a "Location"
keyword.
A grep of your file shows no match for "Location". What are some of the
names of the Locations on your map. I will take a look and see what
kind of identifier they have with them.
Paul
Bursik, Scott {PBSG} wrote:
>Yes.
>
>
>Scott Bursik
>Enterprise Systems Management
>PepsiCo Business Solutions Group
>(972) 963-1400
>scott.bursik@pbsg.com
>
>-----Original Message-----
>From: Paul [mailto:pstroud@bellsouth.net]
>Sent: Monday, May 24, 2004 12:37 PM
>To: nv-l@lists.us.ibm.com
>Subject: Re: [nv-l] build_location.pl
>
>Do you have locations on your map currently?
>
>Paul
>
>
>Meyos Yemveng wrote:
>
>
>
>!
;>I
indeed included the redirection operator ">"
>>
>>*/Jane Curry /* wrote:
>>
>> Meyos,
>> Can I just check you have the correct syntax here - you need to
>> redirect
>> the output from the mapdump command so you should have:
>> ovmapdump -v > ovmapdump.out
>>
>> The ">" is the redirection operator.
>>
>> Cheers,
>> Jane
>>
>> Meyos Yemveng wrote:
>>
>> > Certain I used ovmapdump -v ovmapdump.out
>> >
>> > what OS and perl version are you having succes with?
>> >
>> > */Paul /* wrote:
>> >
>> > Are you sure you used ovmapdump and not ovtopodump?
>> > You must use the mapdump for it work properly. Take a
>> > look at your output from ovmapdump and make sure it is
>> > readable.>>
>
>> > Paul
>> >
>> >
>> > Meyos Yemveng wrote:
>> >
>> > > I am having the same problem with the same version ....
>> > > Running on:
>> > > 1- Solaris 9 , Perl 5.6.1
>> > > 2! - Solaris 8, Perl 5.005_03
>> > >
>> > > It only prints the following:
>> > > # location.conf file was autogenerated on Friday May 21 17:48:01
>> > GMT 2004.
>> > > # Script completed processing on Friday May 21 17:48:05 GMT 2004
>> > >
>> > >
>> > > */Paul /* wrote:
>> > >
>> > > Scott,
>> > > Can you give a better description? What exactly is your problem.
>> > > I have used the script a number of times with no problems on
>> > > different versions of perl across several platforms. What
are
>> > &! gt; you running into thats causing a problem?
>> > >
>> > > Paul
>> > >
>> > >
>> > >
>> > > Bursik, Scott {PBSG} wrote:
>> > >
>> > > > Actually the version I downloaded from
>> > > >
>> > > > http://www.nv-l.org/twiki/bin/view/Netview/LocationConf
>> > > >
>> > > > was the version with the function and I have the problem.
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > Scott Bursik
>> > > >
>> > > > Enterprise Systems Management
>> > > >
>> > > > PepsiCo Business Solutions Group
>> > > >
>> > > > (972) 963-1400
>> > >
>
>> > > > scott.bursik@pbsg.com
>> > > >
>> > > >
>> > >
>> >
>>
>>
>>
>------------------------------------------------------------------------
>
>
>> > > >
>> > > > *From:* Barr, Scott [mailto:Scott_Barr@csgsystems.com]
>> > > > *Sent:* Friday, May 21, 2004 3:55 PM
>> > > > *To:* nv-l@lists.us.ibm.com
>> > > > *Subject:* RE: [nv-l] build_location.pl
>> > > >
>> > ! > >
>> > > >
>> > > > The new version I have not yet posted uses that function. I
>> > > > just haven't had a time to post it to the NetView web home. Good
>> > > catc! h
>> > > > Ray - thanks.
>> > > >
>> > > >
>> > >
>
>> > > >
>> > >
>> >
>>
>>
>>
>------------------------------------------------------------------------
>
>
>> > > >
>> > > > *From:* owner-nv-l@lists.us.ibm.com
>> > > > [mailto:owner-nv-l@lists.us.ibm.com] *On Behalf Of
>> > > > *ray.smith@clorox.com
>> > > > *Sent:* Friday, May 21, 2004 3:46 PM
>> > > > *To:* nv-l@lists.us.ibm.com
>> > > > *Subject:* RE: [nv-l] build_location.pl
>> > > >
>> > > >
>> > > > The problem of empty output is caused by the readline
>> function, a
>> > > > seldom used Perl function that apparently behaves differently in
>> > > > different versions of Perl. If you replace all instances of
>> > > > "rea! dline ($_!
[0])"
with "", the script should work fine
>> > > > ! in any version (or at least version 4 or better, which is
>> > all I've
>> >! ; > > ever worked with) of Perl.
>> > > >
>> > > >
>> > > > Ray Smith
>> > > > IS Engineer
>> > > > The Clorox Services Company
>> > > > 925-425-4363
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > *"Bursik, Scott {PBSG}" *
>> > > > Sent by: owner-nv-l@lists.us.ibm.com
>> > > >
>> > > > 05/21/2004 01:02 PM
>> > > > Please respond to nv-l
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > To: "'nv-l@lists.us.ibm.com'"
>> >!
; >
> cc:
>> > > > Subject: RE: [nv-l] build_location.pl
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > Just for the record, I had the same problem and my perl is
>> at 5.6
>> > > > on AIX 4.3.3.
>> > > >
>> > > >
>> > > > Scott Bursik
>> > > > Enterprise Systems Managemen! t
>> > > > PepsiCo Business Solutions Group
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > >
>> >
>>
>>
>>
>------------------------------------------------------------------------
>
>
>> > > >
>> > > >
>> > > > *From:* Barr, Scott [mailto:Scott_Barr@csgsystems.com]
*
>> > > > Sent:* Friday, May 21, 2004 2:46 PM*
>> > > > To:* nv-l@lists.us.ibm.com*
>> > > > Subject:* RE: [nv-l] build_location.pl
>> > > >
>> > > > I think 5.6 should work. I am on solaris 2.8 and had the issue
>> > > > with PERL 5.05. Let me research a bit and I'll post a response
>> > here.
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > >
>> >
>>
>>
>>
>------------------------------------------------------------------------
>
>
>> > > >
>> > > >
>> > > > *From:* owner-nv-l@lists.us.ibm.com
>> >! ; > > [mailto:owner-nv-l@lists.us.ibm.com] *On Behalf Of *Meyos
>> Yemveng*
>>!
; >
> > Sent:* Friday, May 21, 2004 2:28 PM*
>> > > > To:* nv-l@lists.us.ibm.com*
>> > > > Subject:* RE: [nv-l] build_location.pl
>> > > > I am runn! ing perl v5.6.1 on Solaris 9 ...
>> > > > Q: what version is recommended?
>> > > >
>> > > >
>> > > > */
>> > > > "Barr, Scott" /* wrote:
>> > > > Your PERL version may be a factor. Can you check what
>> version you
>> > > > are using?
>> > > >
>> > > > perl -version will tell you
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > >
>> >
>>
>>
>>
>------------------------------------------------------------------------
>
>
>> > >
>
>> > > >
>> > > > *From:* owner-nv-l@lists.us.ibm.com
>> > > > [mailto:owner-nv-l@lists.us.ibm.com] *On Behalf Of *Meyos
>> Yemveng*
>> > >! ; > Sent:* Friday, May 21, 2004 1:20 PM*
>> > > > To:* netview Tivoli*
>> > > > Subject:* [nv-l] build_location.pl
>> > > > Hi Folks,
>> > > > I downloaded the build_location.pl script
>> > > > I then ran:
>> > > > ovmapdump -v > /tmp/ovmapdump.out
>> > > > build_location.pl /tmp/ovmapdump.out > /tmp/location.conf
>> > > >
>> > > &g! t; my ovmapcount.out is about 7026770 bytes
>> > > > my location.conf file generated is 141 bytes with only the
>> > > > following lines:
>> > > >
>> > > > # location.conf file was
autogenerated on Friday May 21 17:48:01
>> > > > GMT 2004.
>> > > > # Script completed processing on Friday May 21 17:48:05 GMT 2004
>> > > >
>> > > > Q1: Any idea on what I did wrong?
>> > > > Q2: Any suggestions?
>> > > >
>> > > >
>> > > >
>> > > > Thank You,
>> > ! > > Meyos
>> > > > "ALLEZ LES LIONS INDOMPTABLES"
>> > > >
>> > > >
>> > > >
>> > > >
>> > >
>> >
>>
>>
>>
>------------------------------------------------------------------------
>
>
>> > > >
>> > > >
>> > > > Post your free ad now! *Yahoo! Canada Personals*
>> > > >
>> > > >
>!
;>
> > >
>> > > > Thank You,
>> > > > Meyos
>> > > > "ALLEZ LES LIONS INDOMPTABLES"
>> > > >
>> > > >
>> > > >
>> > > >
>> > >
>> >
>>
>>
>>
>------------------------------------------------------------------------
>
>
>> > > >
>> > > >
>> > > > Post your free ad now! *Yahoo! Canada Personals*
>> > > >
>> > > >
>> > >
>> > >
>> > >
>> > > Thank You,
>> > > Meyos
>> > > "ALLEZ LES LIONS INDOMPTABLES"
>> > >
>> > >
>> > >
>> >
>>
>>
>>
>------------------------------------------------------------------------!
>
>
>> > > Post your free ad now! *Yahoo! Canada Personals*
>> > >
>> >
>> >
>> >
>> > Thank You,
>> > Meyos
>> > "ALLEZ LES LIONS INDOMPTABLES"
>> >
>> >
>> >
>>
>>
>>
>------------------------------------------------------------------------
>
>
>> > Post your free ad now! *Yahoo! Canada Personals*
>> >
>>
>>
>> --
>> Tivoli Certified Consultant & Instructor
>> Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
>> Tel: +44 (0)1628 782565
>> Copyright (c) 2004 Jane Curry . All rights reserved.
>>
>>
>>
>>Thank You,
>>Meyos
>>"ALLEZ LES LIONS
INDOMPTABLES"
>>
>>
>>------------------------------------------------------------------------
>>Post your free ad now! *Yahoo! Canada Personals*
>>
>>
>>
>
>
>
>
Thank You,
Meyos
"ALLEZ LES LIONS INDOMPTABLES"
Post your free ad now! Yahoo! Canada Personals
|