RE: [nv-l] No FMT in trapd.conf

[free lancer <larrytechie@yahoo.com>]

James,

I have attached the MIB file but guess will not big take attachments.. Anyway here is the clippet of the MIB file.. Hope you can guess what's missing?

IMPORTS

MODULE-IDENTITY,

OBJECT-TYPE,

OBJECT-IDENTITY,

NOTIFICATION-TYPE,

Integer32,

Unsigned32,

Counter32

FROM SNMPv2-SMI

TEXTUAL-CONVENTION,

DisplayString,

TruthValue,

TimeStamp

FROM SNMPv2-TC

MODULE-COMPLIANCE,

OBJECT-GROUP,

NOTIFICATION-GROUP

FROM SNMPv2-CONF

cerentProducts,

cerentModules

FROM CERENT-GLOBAL-REGISTRY

CerentNotificationClass

FROM CERENT-TC;

cerent454MibModule MODULE-IDENTITY

LAST-UPDATED "000525000000Z" -- 2000/May/25

ORGANIZATION "Cisco Systems, Inc."

CONTACT-INFO

" support@Cisco.com

Postal: Cisco Systems

1450 N. McDowell Blvd.

Petaluma, CA 94954

USA

Tel: +1-877-323-7368"

DESCRIPTION

"This module provides the global registrations for all

other Cisco OTBU MIB modules."

REVISION "000525000000Z" -- 2000/May/25

DESCRIPTION

"o) This file can be used with R2.2 (Afgani) release.

o) Two new traps, freeMemoryOnCardVeryLow and

freeMemoryOnCardAlmostGone have been added."

REVISION "000314000000Z" -- 2000/Mar/14

DESCRIPTION

"A new trap, pertaining to RMON's history reset has been added. "

REVISION "000221000000Z" -- 2000/Feb/21

DESCRIPTION

"This file can be used with R2.1.1 release.

o) Has no changes from the previous version"

REVISION "000220000000Z" -- 2000/Feb/20

DESCRIPTION

"This file can be used with R2.1.0 release.

o) Has no changes from the previous version"

REVISION "000114000000Z" -- 2000/Jan/14

DESCRIPTION

"This file can be used with R2.0.3 release.

o) Has no changes from the previous version"

REVISION "000107000000Z" -- 2000/Jan/07

DESCRIPTION

"This file can be used with R2.0.2 release.

o) Has no changes from the previous version"

REVISION "991124000000Z" -- 1999/Nov/24

DESCRIPTION

"This file is to be used with R2.1 release.

o) The data integrity fault trap has a more clear

description of the trap (99/Nov/24)"

REVISION "990922000000Z" -- 1999/Sept/22

DESCRIPTION

"This file is specifically

intended for R2.0.1 release."

REVISION "990405000000Z" -- 1999/April/05

DESCRIPTION

"The inital version of the module"

::= { cerentModules 20 }

cerent454Mib OBJECT-IDENTITY

STATUS current

DESCRIPTION

"The is the node under which all Cisco ONS 15454

specific mib object are located."

::= { cerentProducts 10 }

Many Thanks,

Larry.

James Shanks <jshanks@us.ibm.com> wrote:

Most likely there is a missing MIB. What's in the IMPORTS section of the MIB you tried to run mib2trap on?

James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
free lancer <larrytechie@yahoo.com>

free lancer <larrytechie@yahoo.com>
Sent by: owner-nv-l@lists.us.ibm.com

12/15/2004 03:24 PM

Please respond to
nv-l

To	nv-l@lists.tivoli.com
cc
Subject	RE: [nv-l] No FMT in trapd.conf

Hey Don,
I did execute the script to add the traps but none of the them were added.
Firstly when i did mib2trap mibfile mibfile.sh, i got many messages as below:

Left-over node nodeGroup ::= { cerent454Groups 10 } (0)

Enterprise object id not found for trap alarmUnknown, (6,1)

Then when i ran script file.. nothing added but error message was "enterprise id could not be found.." Did you come across this when it happned to you?
Many Thanks,
Larry

"Davis, Donald" <donald.davis@firstcitizens.com> wrote:
Larry,
One more thing.
mib2trap does produce a script with 274 traps defined when run against the cerent454.mib.txt file.
Including the 2120 Threshold trap.

Don Davis

-----Original Message-----
From: Davis, Donald [mailto:donald.davis@firstcitizens.com]
Sent: Tuesday, December 14, 2004 3:56 PM
To: 'nv-l@lists.us.ibm.com'
Cc: 'free lancer'
Subject: RE: [nv-l] No FMT in trapd.conf

Larry,
I discovered this MIB link the other day. It seems pretty comprehensive. Do a <CTRL-F> and search for 3607.

http://www.assure24.com/databases/snmp-mib/private

It lists the following available Cerent MIBs. They are MIB-2...... :(
I briefly looked through the "NOTIFICATION-TYPE" clauses and see that a 2120 event is defined as follows.
DESCRIPTION "performance Monitor Threshold Crossing Alert"
::= { cerent454V2Events 2120 }
It looks like some threshold was exceeded with a value of 20. I could be way off on this since I am not an SNMPv2 expert.
Like James said, you are going to have to define these yourself. Look through the MIB files for "NOTIFICATION-TYPE".
These are the trap definitions.
Best regards,
Don Davis



Name	Description
CERENT-454-MIB	This module provides the global registrations for all other Cisco OTBU MIB modules.
CERENT-GLOBAL-REGISTRY	This module provides the global registrations for all other Cisco OTBU MIB modules.
CERENT-TC	This module provides the global registrations for all other Cisco OTBU MIB modules.

-----Original Message-----
From: free lancer [mailto:larrytechie@yahoo.com]
Sent: Tuesday, December 14, 2004 1:36 PM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] No FMT in trapd.conf

Hi all,
I need some help. We are getting these "No FMT in Trapd.conf" as below:

" TEC_ITS_BASE - NO FMT IN TRAPD.CONF: mgmt.mib-2.snmp (1.3.6.1.2.1.11) generic:4 specific:0 args(2): [1] private.enterprises.3607.6.10.100.10.20.0 (OctetString): 20041214125033D [2] enterprises.3607.6.10.20.30.20.1.80.638648832.2120 (Integer): 20 "

Our Network guys say that this is Cerent 15454 device with 2.5 software version and they don't have the software. I have looked into entire Cisco site but unable to get this. Could anyone has the mibs and forward to me please.?

Also can this be manually added in trap config? if so what will be the enterprise id, generic & specific?

We have 7.1.3 FP3 on AIX.

Many Thanks,

Larry.

---

Do you Yahoo!?
Dress up your holiday email, Hollywood style. Learn more.
------------------------------------------------------------------------------
This electronic mail and any files transmittted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.
==============================================================================

---

Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.

---

Do you Yahoo!?
 
The all-new My Yahoo! ? Get yours free!