nv-l
[Top] [All Lists]

Re: [nv-l] ContainerLayer2Status??

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] ContainerLayer2Status??
From: Francois Le Hir <flehir@ca.ibm.com>
Date: Thu, 12 May 2005 10:16:55 -0400
Delivery-date: Thu, 12 May 2005 15:18:41 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
In-reply-to: <OF44B6F9A2.71DA43BB-ON45256FFF.004C88EC-45256FFF.004CD6C6@s-iii.com>
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
Each switch has a "Layer2status" object at the interface level with an ip
0.0.0.0. This object represent the layer 2 status of the switch. The
"ContainerLayer2Status" container (at the network level) is just there to
contain all the different "Layer2Status" of the different switch that have
been discovered by itsl2. If it show red, it means that all the switches
discovered by itsl2 have been correlated as down by itsl2.

Salutations, / Regards,

Francois Le Hir
Network Projects & Consulting Services
IBM Global Services
Phone: (514) 964 2145


                                                                           
             usman.taokeer@s-i                                             
             ii.com                                                        
             Sent by:                                                   To 
             owner-nv-l@lists.         nv-l@lists.us.ibm.com               
             us.ibm.com                                                 cc 
                                                                           
                                                                   Subject 
             05/12/2005 09:59          [nv-l] ContainerLayer2Status??      
             AM                                                            
                                                                           
                                                                           
             Please respond to                                             
                   nv-l                                                    
                                                                           
                                                                           





Hi,

We have NetView7.1.4 FP3 with Switch Analyzer installed on Windows Machine.
We have One Cisco(2950) switch on LAN. The NetView shows a symbol
"ContainerLayer2Status" in red and when i open it there is an inteface with
"0.0.0.0" ip address and it shows it as down. What is that "0.0.0.0"
interface and why is it down?


~Usman







<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web