Hi list, I recently upgraded from NetView 7.1.1 to 7.1.4 fp2 on AIX. (I
know fp3 is available but it has not been out long enough). Anyhow my map
synchronization time is at least 10x greater than it was previously. I
have about 35,000 objects in my database. I found a technote on IBM's
website (one of those lucky times that it was actually up!) that listed
some ways to help improve map sync time. One of those items was to look
for nonstandard objects in the database by running 'ovtopofix -m'. However
it did not tell you what to do with those nonstandard items. Below is
partial listing of the output from ovtopofix -m:
NONSTANDARD 2359 Interface object for MS2006RTR:to050634 not in Topology
NONSTANDARD 2473 Interface object for MS2054RTR:ct150722 not in Topology
NONSTANDARD 2542 Interface object for LA4078RTR:ct1159764 not in Topology
NONSTANDARD 2469 Interface object for MS2056RTR:ct150768 not in Topology
NONSTANDARD 249728 Interface object for
DR-Core-6509-1:DR-Core-6509-1:4:DR-Core-
6509-2:11249758 not in Topology
NONSTANDARD 2511 Interface object for LA4059RTR:ct140155 not in Topology
NONSTANDARD 2335 Interface object for MS551RTR:ct144464 not in Topology
NONSTANDARD 26086 Interface object for TNNOCRTR7513-2:TokenRing11/1 not in
Topol
ogy
NONSTANDARD 238480 Interface object for Interface:FastEthernet3/1/0253043
not in
Topology
NONSTANDARD 2509 Interface object for LA4044RTR:ct1166481 not in Topology
Do I just delete these objects from the database? If so what is the
preferred mechanism for doing so?
An hour now and my map still hasn't sync'd ...
---
Don Turrentine
BH-0302
AmSouth Bank
P.O. Box 11007
Birmingham, AL 35288
(205) 261-6351
|