RE: [nv-l] Object Status Stays Marginal After Acknowledging

[usman.taokeer@s-iii.com]

Yeah that's what i thought, but it aint
working here ? by default its set to "Set for this Symbol Only"


Regards,
Usman Taokeer
Si3.

"Allison, Jason \(JALLISON\)" <JALLISON@arinc.com>
Sent by: owner-nv-l@lists.us.ibm.com

23-06-05 04:54 PM

Please respond to
nv-l@lists.us.ibm.com

To	<nv-l@lists.us.ibm.com>
cc
Subject	RE: [nv-l] Object Status Stays Marginal After Acknowledging

It is my understanding that when you ack a child node,
the parent should
change to green.  I don't understand why it wouldn't be working for
you,
it has worked for me in the past.  Also, we did not have to change
any
propigation status, we "propigate most critical"


Jason Allison
Principal Engineer
ARINC Incorporated


-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of usman.taokeer@s-iii.com
Sent: Thursday, June 23, 2005 1:20 AM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] Object Status Stays Marginal After Acknowledging



HI, 

We are using NetView 7.1.4 FP3 on Windows. I am facing a problem when a
child node goes down for some reason the status of Parent changes to
yellow which is Normal. But when i acknowledge the "DOWN" child-node
the
parent still stays Yellow, isn't the status of parent dependent on
child? I have to manually change that object properties to "Propagate
status from Child". In case of a router this gets more difficult because
all the networks connected to it turns out to Yellow (Marginal). 


Regards, 
Usman Taokeer 
Si3.