We're almost there James--
Mgragentd.log and netmon.trace show problems. This is from
mgragentd.log:
___________________________________________________
Thu Aug 18 16:09:26 EDT 2005 (352480) mgragentd - SNMP connected:
mgragentd (mgrDaemonStatusEntry)
Thu Aug 18 16:09:26 EDT 2005 (352480) mgragentd - SMUX registration
requested: mgrAgentd, priority -1
Thu Aug 18 16:09:27 EDT 2005 (352480) mgragentd - SMUX registration
failed
Thu Aug 18 17:59:50 EDT 2005 (352480) mgragentd - terminating due to
SIGTERM signal
Thu Aug 18 17:59:50 EDT 2005 (352480) mgragentd - SNMP disconnected -
reason=0
Thu Aug 18 18:14:18 EDT 2005 (680122) mgragentd - NV/6000 SNMP Manager
sub-agent for AIXV3.2, created Wed Mar 16 23:17:10 EST 2005
Thu Aug 18 18:14:18 EDT 2005 (680122) mgragentd - SNMP connected:
mgragentd (mgrAgentd)
Thu Aug 18 18:14:18 EDT 2005 (680122) mgragentd - SMUX registration
requested: mgrAgentd, priority -1
Thu Aug 18 18:14:18 EDT 2005 (680122) mgragentd - SMUX registration
failed
_____________________________________________________
Based on the smux settings in snmpd.conf I walked the MIB and no values
are returned for the Oid's under mgrAgentd. These values exist on
ustivux01 so I can only assume they were not populated when NetView was
reinstalled on tivux02. So there's my problem--is there something I can
do to repopulate these values outside SNMP set?
Thanks--Drew
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of James Shanks
Sent: Friday, August 19, 2005 8:35 AM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Internal NetView UP trap reporting wrong hostname
OK, mgragentd is running on ustivux02. Did you see anything suspicious
in
his log?
Another thing you might try is to turn on the netmon trace (netmon -M
-1)
and then demandpoll ustivux02 and see what gets written to the trace
about
him. Turn the trace off immediately following with netmon -M 0 to kept
as
much irrelevant stuff out of the netmon.trace file. Even without
looking
at the trace you should see an attempt at getting the Manager Product
Name
in the demandpoll window or in the output from the command line
nmdemandpoll. You could even compare the results from 01 which is
working
with those of 02 which isn't and see whether you can determine why.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
This message (including any attachments) contains confidential information
intended for a specific individual and purpose, and is protected by law. If
you are not the intended recipient, you should delete this message. Any
disclosure, copying, or distribution of this message, or the taking of any
action based on it, is strictly prohibited. [v.E.1]
|