Re: [nv-l] Generating Topology Map with MLMs

[usman.taokeer@s-iii.com]

Thanks for all this info. You see what
i want to achieve here is , a customer has outsourced their network to
us to manage . We have NetView that we use to monitor our own private network,
how can i use the same NetView to manage the customer's network as well.
The main idea is to have a single console view of both networks.

Jane Curry <jane.curry@skills-1st.co.uk>
Sent by: owner-nv-l@lists.us.ibm.com

05-09-05 11:03 AM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com
cc
Subject	Re: [nv-l] Generating Topology Map with MLMs

NetView can display maps that contain nodes discovered
by an MLM.  
However, the MLM itself gives you no display capability.  An MLM can
also only discover nodes on it's own IP network so if your client has a
single network then the MLM discovery should work fine but if he has 
more than one network then you will need an MLM per network. 

If there are firewalls between you and your customer, you need both ping
and SNMP access through the firewall.  Although MLM can discover 
networks, NetView only "believes" info from MLM when he has got
at least 
one ping though to an MLM-discovered node.

I think people have tried putting more than one NIC card in an MLM to 
monitor several networks but my impression is that no-one has got this
to work reliably - not tried it personally.

Cheers,
Jane

usman.taokeer@s-iii.com wrote:

>
> Hi,
>
> I just  need to know, can NetView create IP maps based upon the
info 
> forwarded by MLMs. The scenario is we want to monitor a clients 
> network using NetView, can i just put the MLM there or do i need to
> connect NV directly to that network?
>
> Regards,
> Usman Taokeer
> Si3. 


-- 
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2005 Jane Curry <jane.curry@skills-1st.co.uk>.  All
rights reserved.