Re: [nv-l] FIXED - HP Printer Traps error

[usman.taokeer@s-iii.com]

Thanks once again James.

James Shanks <jshanks@us.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com

17-10-05 05:46 PM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com
cc
Subject	Re: [nv-l] FIXED - HP Printer Traps error

Edit the addtrap bat file that mib2trap created and
re-run it.



James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group


                    
                     
                     
          
             usman.taokeer@s-i    
                     
                  
             ii.com      
                     
                     
     
             Sent by:      
                     
                     
To 
             owner-nv-l@lists.    
    nv-l@lists.us.ibm.com          
    
             us.ibm.com      
                     
                    cc
                    
                     
                     
          
                    
                     
                     
  Subject 
             10/17/2005 06:41    
     Re: [nv-l] FIXED - HP Printer Traps 
             AM        
               error    
                     
    
                    
                     
                     
          
                    
                     
                     
          
             Please respond to    
                     
                  
                   nv-l  
                     
                     
     
                    
                     
                     
          
                    
                     
                     
          





I understand that what i mean was how can i change it using the mib2trap
utility while importing the traps. You see i've loaded the traps (around
500) but all of them are set to LOGONLY now how can i change them all
back(to error events etc) simultaneously?


                    
                     
                     
          
 James Shanks <jshanks@us.ibm.com>          
                     
        
 Sent by:                  
                     
                     
   
 owner-nv-l@lists.us.ibm.com            
                     
         To 
                    
                     
    nv-l@lists.us.ibm.com       
                    
                     
                     
       cc 
 14-10-05 06:35 PM                
                     
                  
                    
                     
                     
  Subject 
                    
                     
    Re: [nv-l] FIXED - HP       
          Please respond to      
             Printer Traps error  
      
        nv-l@lists.us.ibm.com      
                     
                 
                    
                     
                     
          
                    
                     
                     
          
                    
                     
                     
          
                    
                     
                     
          
                    
                     
                     
          
                    
                     
                     
          





Of course you can!  LOGONLY is just the default.  You can change
anything
you like about the way those traps are formatted.
mib2trap is just a convenience routine.  The only things it took from
the
MIB were the enterprise name and OID and the specific trap number and its
label.  Everything else is up to you.  mib2trap provides the
simplest, most
innocuous defaults and you can change those anyway you like.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group



            usman.taokeer@s-i
            ii.com
            Sent by:      
                     
                     
To
            owner-nv-l@lists.    
    nv-l@lists.us.ibm.com
            us.ibm.com      
                     
                    cc

                    
                     
                     
 Subject
            10/14/2005 01:45    
     Re: [nv-l] FIXED - HP Printer Traps
            AM        
               error


            Please respond to
                  nv-l







James,

Thank you very much, adding a space solved the problem! Now i have all
the
traps listed in trapd.conf. There is just one problem that all the traps
are added as "LOG ONLY" this will not show the event when the
trap comes
can i change that to "Error Events" so that the appear in the
Event console
as well!

Regards,
Usman
Si3.


James Shanks <jshanks@us.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com
                    
                     
                     
      To
                    
                     
        nv-l@lists.us.ibm.com
13-10-05 06:27 PM                
                     
               cc

                    
                     
                     
 Subject
           Please respond to      
                Re: [nv-l] HP Printer
         nv-l@lists.us.ibm.com      
              Traps error












Edit the MIB and insert a space between "::=" and "1".
 Then try again.
The code parses on spaces, and it doesn't recognize "::=1" as
being the
same as "::= 1"


James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group



           usman.taokeer@s-i
           ii.com
           Sent by:        
                     
                    To
           owner-nv-l@lists.      
  nv-l@lists.us.ibm.com
           us.ibm.com        
                     
                  cc

                    
                     
                     
Subject
           10/13/2005 12:29      
   Re: [nv-l] HP Printer Traps error
           AM


           Please respond to
                 nv-l







Hi James,

I tired that(mib2trap) but its giving me the following error:

C:\HP Printer MIBs>mib2trap trapmib.mib hptrap.bat
       Errors - no script generated.
Error defining TRAP-TYPE: Expected '::=', found (::=1): On or around line
44

here's what is on from line 40-44:

periphStatusChange TRAP-TYPE
              ENTERPRISE    
   net-printer
              DESCRIPTION
                    
 "The status of the peripheral has changed"
      ::=1

I can send the entire mib file containing all trap definitions for your
reference as well if you say so!

Regards,
Usman Taokeer
Si3.



James Shanks <jshanks@us.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com
                    
                     
                     
     To
                    
                     
       nv-l@lists.us.ibm.com
10-10-05 07:47 PM                
                     
               cc

                    
                     
                     
Subject
          Please respond to      
                Re: [nv-l] HP Printer
        nv-l@lists.us.ibm.com      
              Traps error












Loading the MIB will not help.   NetView is different from OpenView
in this
regard and I cannot emphasize this often enough.

The "no format message" from trapd means that there is no definition
for
this trap in trapd.conf.
To add a definition, you either manually configure it with Trap Settings,
using the detailed information in trapd.log or you use the addtrap command.
If you have a MIB which describes those traps, then you can use mib2trap
on
the MIB file to create an addtrap script.
But merely loading the MIB will not help.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group



          Michael_Noonkesse
          r@bluecrossmn.com
          Sent by:        
                     
                    To
          owner-nv-l@lists.      
  nv-l@lists.us.ibm.com
          us.ibm.com        
                     
                  cc

                    
                     
                     Subject
          10/10/2005 10:27      
   Re: [nv-l] HP Printer Traps error
          AM


          Please respond to
                nv-l







Okay I'm sorry the reason you are getting the "unknown format msg
is you
do not have the correct mib loaded for the device that is sending the
trap.
Can you identify the model of the printer that is sending the
traps?www.mibdepot.com is a good resource for mibs
I don't process anything from printers so I may not be any further help.
with configs-

Use >Options>Load/Unload SNMP Mibs  drop down from the Netview
GUI to
add(load) new mibs,. ( Handy to know the location of the file  before
hand
though)

But if you don't want to see that msg, use >Options> Event Configuration:
Trap customization and set it to not log and not display. Do not forward
etc etc.

Regards,

Mike Noonkesser
Office 651-662-1012
Fax    651-662-2279



usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com
10/09/2005 10:58 PM
Please respond to
nv-l@lists.us.ibm.com


To
nv-l@lists.us.ibm.com
cc

Subject
Re: [nv-l] HP Printer Traps error







Micheal,
Thats great i would use that to compile a rule for it for TEC, but what
should i do with Netview events.... will that fix the problem in NV as
well? Do i need to edit the trapd.conf file??

Regards,
~Usman


Michael_Noonkesser@bluecrossmn.com
Sent by: owner-nv-l@lists.us.ibm.com
08-10-05 02:06 AM

Please respond to
nv-l@lists.us.ibm.com


To
nv-l@lists.us.ibm.com
cc

Subject
Re: [nv-l] HP Printer Traps error









Run : /usr/OV/bin/mib2trap <MIB NAME>.mib <MIB NAME.trap <MIB
NAME>.baroc

>From the dir you mib is in run mib2trap with output file being
hpstuff.trap and hpstuff.baroc being the baroc that will be loaded to TEC
if you are forwarding to TEC

mib2trap assists in event customization.

Usage:
mib2trap <mib file> <output file> [<baroc file>] [<base
class>]
    <mib file> is your input mib definition file,
    <output file> will contain a series of 'addtrap' commands,
    <baroc file> will contain baroc statements to be used
with T/EC.
    <base class> indicates the base class for the optional
baroc fil

Regards,

Mike Noonkesser
NV 7.1.3 Solaris



John M Gatrell <John.Gatrell@uk.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com
10/07/2005 03:15 AM
Please respond to
nv-l@lists.us.ibm.com


To
nv-l@lists.us.ibm.com
cc

Subject
Re: [nv-l] HP Printer Traps error







You need to run the addtrap command with suitable parameters.

The infomation comes either from running mib2trap on the HP MIB and
capturing the output
in a script file. You can ignore errors from the rest of the mib as long
as something appears in the script file.

Or manually from looking in trapd.log.
In particular you need the 'Enterprise' number and the 'Specific' trap
number.

I seem to remember running mib2trap on a Unix version of Netview,
and taking the script across to the windows version, renaming it as a
'.bat'

It should also be possible to do the same through the graphical interface.



John Gatrell

>NV 7.1.4 FP03
>SA
>Windows 2000 SP4
> I am having a large number of errors on Netview stating
> 'trap found with no know format in trapd.conf' what do i need to do
get
it fixed?
> The traps are coming from a HP network printer.


----------------------------
Important news about email communications:

If our business rules identify sensitive information, you will receive
a
ZixMail Secure Message with a link to view your message. First-time
recipients will be asked to create a password before they are granted
access. To learn more about ZixMail, ZixCorp Secure Email Message Center,
and other ZixCorp offerings, please go to
http://userawareness.zixcorp.com/secure4/index.php
----------------------------

The information contained in this communication may be confidential,
and is intended only for the use of the recipient(s) named above.
If the reader of this message is not the intended recipient, you
are hereby notified that any dissemination, distribution, or
copying of this communication, or any of its contents, is strictly
prohibited. If you have received this communication in error,
please return it to the sender immediately and delete the original
message and any copy of it from your computer system. If you have
any questions concerning this message, please contact the sender.

Unencrypted, unauthenticated Internet e-mail is inherently insecure.
Internet messages may be corrupted or incomplete, or may incorrectly
identify the sender.



----------------------------
Important news about email communications:

If our business rules identify sensitive information, you will receive
a
ZixMail Secure Message with a link to view your message. First-time
recipients will be asked to create a password before they are granted
access. To learn more about ZixMail, ZixCorp Secure Email Message Center,
and other ZixCorp offerings, please go to
http://userawareness.zixcorp.com/secure4/index.php
----------------------------

The information contained in this communication may be confidential,
and is intended only for the use of the recipient(s) named above.
If the reader of this message is not the intended recipient, you
are hereby notified that any dissemination, distribution, or
copying of this communication, or any of its contents, is strictly
prohibited. If you have received this communication in error,
please return it to the sender immediately and delete the original
message and any copy of it from your computer system. If you have
any questions concerning this message, please contact the sender.

Unencrypted, unauthenticated Internet e-mail is inherently insecure.
Internet messages may be corrupted or incomplete, or may incorrectly
identify the sender.