Edit the MIB and insert a space between "::=" and "1". Then try again.
The code parses on spaces, and it doesn't recognize "::=1" as being the
same as "::= 1"
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
usman.taokeer@s-i
ii.com
Sent by: To
owner-nv-l@lists. nv-l@lists.us.ibm.com
us.ibm.com cc
Subject
10/13/2005 12:29 Re: [nv-l] HP Printer Traps error
AM
Please respond to
nv-l
Hi James,
I tired that(mib2trap) but its giving me the following error:
C:\HP Printer MIBs>mib2trap trapmib.mib hptrap.bat
Errors - no script generated.
Error defining TRAP-TYPE: Expected '::=', found (::=1): On or around line
44
here's what is on from line 40-44:
periphStatusChange TRAP-TYPE
ENTERPRISE net-printer
DESCRIPTION
"The status of the peripheral has changed"
::=1
I can send the entire mib file containing all trap definitions for your
reference as well if you say so!
Regards,
Usman Taokeer
Si3.
James Shanks <jshanks@us.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com
To
nv-l@lists.us.ibm.com
10-10-05 07:47 PM cc
Subject
Please respond to Re: [nv-l] HP Printer
nv-l@lists.us.ibm.com Traps error
Loading the MIB will not help. NetView is different from OpenView in this
regard and I cannot emphasize this often enough.
The "no format message" from trapd means that there is no definition for
this trap in trapd.conf.
To add a definition, you either manually configure it with Trap Settings,
using the detailed information in trapd.log or you use the addtrap command.
If you have a MIB which describes those traps, then you can use mib2trap on
the MIB file to create an addtrap script.
But merely loading the MIB will not help.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
Michael_Noonkesse
r@bluecrossmn.com
Sent by: To
owner-nv-l@lists. nv-l@lists.us.ibm.com
us.ibm.com cc
Subject
10/10/2005 10:27 Re: [nv-l] HP Printer Traps error
AM
Please respond to
nv-l
Okay I'm sorry the reason you are getting the "unknown format msg is you
do not have the correct mib loaded for the device that is sending the
trap.
Can you identify the model of the printer that is sending the
traps?www.mibdepot.com is a good resource for mibs
I don't process anything from printers so I may not be any further help.
with configs-
Use >Options>Load/Unload SNMP Mibs drop down from the Netview GUI to
add(load) new mibs,. ( Handy to know the location of the file before hand
though)
But if you don't want to see that msg, use >Options> Event Configuration:
Trap customization and set it to not log and not display. Do not forward
etc etc.
Regards,
Mike Noonkesser
Office 651-662-1012
Fax 651-662-2279
usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com
10/09/2005 10:58 PM
Please respond to
nv-l@lists.us.ibm.com
To
nv-l@lists.us.ibm.com
cc
Subject
Re: [nv-l] HP Printer Traps error
Micheal,
Thats great i would use that to compile a rule for it for TEC, but what
should i do with Netview events.... will that fix the problem in NV as
well? Do i need to edit the trapd.conf file??
Regards,
~Usman
Michael_Noonkesser@bluecrossmn.com
Sent by: owner-nv-l@lists.us.ibm.com
08-10-05 02:06 AM
Please respond to
nv-l@lists.us.ibm.com
To
nv-l@lists.us.ibm.com
cc
Subject
Re: [nv-l] HP Printer Traps error
Run : /usr/OV/bin/mib2trap <MIB NAME>.mib <MIB NAME.trap <MIB NAME>.baroc
>From the dir you mib is in run mib2trap with output file being
hpstuff.trap and hpstuff.baroc being the baroc that will be loaded to TEC
if you are forwarding to TEC
mib2trap assists in event customization.
Usage:
mib2trap <mib file> <output file> [<baroc file>] [<base class>]
<mib file> is your input mib definition file,
<output file> will contain a series of 'addtrap' commands,
<baroc file> will contain baroc statements to be used with T/EC.
<base class> indicates the base class for the optional baroc fil
Regards,
Mike Noonkesser
NV 7.1.3 Solaris
John M Gatrell <John.Gatrell@uk.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com
10/07/2005 03:15 AM
Please respond to
nv-l@lists.us.ibm.com
To
nv-l@lists.us.ibm.com
cc
Subject
Re: [nv-l] HP Printer Traps error
You need to run the addtrap command with suitable parameters.
The infomation comes either from running mib2trap on the HP MIB and
capturing the output
in a script file. You can ignore errors from the rest of the mib as long
as something appears in the script file.
Or manually from looking in trapd.log.
In particular you need the 'Enterprise' number and the 'Specific' trap
number.
I seem to remember running mib2trap on a Unix version of Netview,
and taking the script across to the windows version, renaming it as a
'.bat'
It should also be possible to do the same through the graphical interface.
John Gatrell
>NV 7.1.4 FP03
>SA
>Windows 2000 SP4
> I am having a large number of errors on Netview stating
> 'trap found with no know format in trapd.conf' what do i need to do get
it fixed?
> The traps are coming from a HP network printer.
----------------------------
Important news about email communications:
If our business rules identify sensitive information, you will receive a
ZixMail Secure Message with a link to view your message. First-time
recipients will be asked to create a password before they are granted
access. To learn more about ZixMail, ZixCorp Secure Email Message Center,
and other ZixCorp offerings, please go to
http://userawareness.zixcorp.com/secure4/index.php
----------------------------
The information contained in this communication may be confidential,
and is intended only for the use of the recipient(s) named above.
If the reader of this message is not the intended recipient, you
are hereby notified that any dissemination, distribution, or
copying of this communication, or any of its contents, is strictly
prohibited. If you have received this communication in error,
please return it to the sender immediately and delete the original
message and any copy of it from your computer system. If you have
any questions concerning this message, please contact the sender.
Unencrypted, unauthenticated Internet e-mail is inherently insecure.
Internet messages may be corrupted or incomplete, or may incorrectly
identify the sender.
----------------------------
Important news about email communications:
If our business rules identify sensitive information, you will receive a
ZixMail Secure Message with a link to view your message. First-time
recipients will be asked to create a password before they are granted
access. To learn more about ZixMail, ZixCorp Secure Email Message Center,
and other ZixCorp offerings, please go to
http://userawareness.zixcorp.com/secure4/index.php
----------------------------
The information contained in this communication may be confidential,
and is intended only for the use of the recipient(s) named above.
If the reader of this message is not the intended recipient, you
are hereby notified that any dissemination, distribution, or
copying of this communication, or any of its contents, is strictly
prohibited. If you have received this communication in error,
please return it to the sender immediately and delete the original
message and any copy of it from your computer system. If you have
any questions concerning this message, please contact the sender.
Unencrypted, unauthenticated Internet e-mail is inherently insecure.
Internet messages may be corrupted or incomplete, or may incorrectly
identify the sender.
|