Hi all, I'm a new user to tivoli netview.
Recently our company triy to implement netview in one of our customer,
but the problem is they have some devices that only support snmpv2. So
after doing hours of investigation throughout this mailing list
archive, I presume netview does not fully support snmpv2, but it
support partially by giving abilities to load mibv2 via loadmibv2 or
web console mib loader, browse it via browserv2 or mibbrowser.jar, and
collect the data by manually editing snmpcol.conf.
and I have some desperate questions about that:
1. Does somebody know when IBM will release the next version to fully
support v2? Most of our customer is really concerned about it; they
don't want to use netview unless it support all device that they
have...
2. How can an only-snmpv2-supported device be recognized as a
snmpSupported device on discovery process? Coz whenever i look at the
device, it's only recognized as a common node, so I couldn't do
anything with it... is there something related to snmpwalk? coz when i
try to walk the device, it just time-out. But using other software
(orion eg.) I can walk it successfully.
3. I tried to load the device mib via loadmibv2 and web console, and
it loaded successfully, and I able to browse it. But why I can't
browse to mib-2 OID in browserv2.exe to get the traffic statistic
(such as ifInOctets)? I can get the statistic using web console
browser, but I couldn't do it using browserv2, coz there's no child
item below mgmt node mib...
4. I tried to manually edit snmpcol.conf in attempt to collect the
data from the device, there are no error message whatsoever and the
status said that it was "Collecting", but there were no data at all
when I try to see it. But when I use the mibbrowser.jar, I can walk
the traffic data perfectly. Is there something wrong with it? Here's a
few line I made manually:
MIB .1.3.6.1.4.1.161.19.3.2.2.5 .* radioSlicing units INTEGER R ljkttivoli
C 192.168.50.181 0xffffffff 30 > 0.000000 <= 0.000000 x% s 58720263
MIB .1.3.6.1.2.1.2.2.1.10 .* ifInOctets units COUNTER R ljkttivoli
C 192.168.50.181 0xffffffff 30 > 0.000000 <= 0.000000 xA s 58720263
I also tried the tool builder to collect the data but to no avail at
all. It said there was nothing to graph from the device.
5. Actually I want to ask about trapping with v2, but I guess it's
hopeless with this data collection problem... I figured it will be
pretty easy once we able to collect the data.
FYI, the device we tried to collect is motorola canopy wireless bridge
and tenor voice devices. Our netview version is 7.1.4 with Fixpack 3
on windows 2k3 platform using MSSQL 2k database. Any help is highly
appreciated!
Thanks.
btw. sorry about the language, i'm not a native speaker if u ask.
Regards,
Oswin
|