Catalina,
James beat me to the punch :)
You missed /usr/OV/bitmaps/C/
This directory contains the bitmaps of the Cisco Icons.
Then you will need to run:
ovw -fields
ovw -config
ovw -verify
ovstop netmon
ovtopofix -A
ovstart netmon
Start the GUI and you should have Cisco symbols
I've been adding Cisco symbols for years....
HTH,
Don Davis
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of Catalina Martinez
Sent: Thursday, February 23, 2006 4:33 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Cisco Integration Utility
Thank you for you suggestions. Let me run this by you all and see what
you all think and in the process clarify a few things.
1) the current production netview apparently is corrupted but we do not
know the extent. Its limping along...I was advised by Support to restore
the current production from a good backup, however since I don't how
long we've had issues and we had just received our new server
(hardware)decided to build it from scratch.
The new server (pSeries 520) came with AIX 5.2 (which is also running on
the production server but this one is an H70). I installed Netview 7.1.4
FP 4.
We have a CiscoWorks (Windows) to access Ciscoview and all other CW
applications. I don't want to back level this new server to 5.1 just to
get icons? We only want the cisco symbols/icons on the map. Can I just
transfer specific files for mibs/traps/symbols to accomplish this?
I believe the files I need to copy from Production are:
oid_to_type
oid_to_sym
/usr/OV/fields
/usr/OV/symbols
/usr/OV/snmp_mibs
/usr/OV/conf/C/trapd.conf
is that correct?
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of Anabella_Gonzalez@banesco.com
Sent: Thursday, February 23, 2006 12:06 PM
To: nv-l@lists.us.ibm.com
Cc: nv-l@lists.us.ibm.com; owner-nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Cisco Integration Utility
Yes, we did it. In fact, now we have it in production environment, and
it
is working very good.
Catalina, you can find the mail that I send to the list, the reference
to
find it is: Error Integrating Netview - CiscoWork...
I hope that information can help you...but whatever you need, let me
know.
Regards...
Saludos,
Anabella GD
James Shanks
<jshanks@us.ibm.c
om>
Para
Enviado por: nv-l@lists.us.ibm.com
owner-nv-l@lists.
cc
us.ibm.com
Asunto
RE: [nv-l] Cisco Integration
23/02/2006 12:16 Utility
p.m.
Por favor,
responda a
nv-l@lists.us.ibm
.com
Perhaps someone with actual experience with this will chime in, but per
the
postings in the past, the Cisco integration utility does not run on AIX
5.2. The last level was 5.1. While the NetView migration utilities
pulled it all over for your migrated system, because they save all user
mods, you cannot run the utility on AIX 5.2, or so I am told.
however,
there is nothing to prevent you from manually copying all the pieces
from
one system to another. Or you might try de-installing NetView, copying
the
migration directory /usr/OV.back.v7r1 from your old system to his new
box,
and doing an update install here as well. You can then re-customize
this
new NetView to your liking. You can go to /usr/OV/newconfig and get all
the new install files and replace the migrated ones. You can clear out
xnmsnmpconf and replace it with your default community names, You can
then
delete the database and start a fresh discovery. Whatever you want to
do.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
"Catalina
Martinez"
<Catalina.Martine
To
z@tlc.state.tx.us <nv-l@lists.us.ibm.com>
>
cc
Sent by:
owner-nv-l@lists.
Subject
us.ibm.com RE: [nv-l] Cisco Integration
Utility
02/23/2006 09:40
AM
Please respond to
nv-l@lists.us.ibm
.com
oh...AIX 5.2 ML 6, NETVIEW 7.1.4 FP4 (NEW Development SERVER)
production server AIX 5.2 ML 4, Netview 7.1.4. FP3, Integration Utility
1.6
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On
Behalf Of Catalina Martinez
Sent: Thursday, February 23, 2006 8:37 AM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] Cisco Integration Utility
Hello,
I'm trying to load all cisco symbols/icons onto Netview. I've downloaded
Integration IntgUtil.v1_6.AIX and tried installing. Its giving me a
bunch
of errors
ERROR: Install patch bos.rte.libpthreads 5.1.0.0
ERROR: and retry installation.
ERROR: Bad OS version 5.2.0.0
I'm running AIX 5.2 and the integration Utility that I downloaded is the
latest AIX out on Cisco Website. I do have a ticket open with Cisco but
just wondering if anyone has successfully installed the integration
utility
on AIX 5.2.
I currently have AIX 5.2 and the integration utility installed. this
server
was migrated from AIX 5.1 ->5.2 and the integration utility migrated
along
with it. However, the one I'm questioning is a brand new server, came
with
AIX 5.2, installed a brand new Netview and integration utility.
I just want the cisco symbols on the netview map (as well as all the
traps
and mibs).
-----------------------------------------
***REGULACIN DE USO DEL CORREO ELECTRNICO DE Banesco Banco Universal
HACIA INTERNET***
La informacin contenida en este correo electrnico y cualquier anexo
puede ser de carcter confidencial y es propiedad de Banesco Banco
Universal. Slo est permitido su uso, copia, transmisin, recepcin o
distribucin a personas debidamente autorizadas. Si usted recibi este
correo por error por favor destryalo y/o elimine cualquier copia
guardada en su sistema y notifique inmediatamente al remitente o a la
direccin de correo electrnica mailmaster@banesco.com. Usted no debe
utilizar la informacin contenida para ningn propsito ni compartirla
con otras personas.
***REGULATION OF USE
FOR ELECTRONIC MAIL OF Banesco Banco Universal TOWARDS INTERNET***
The information contained in this electronic mail and any attachment
can be of confidential character and is property of Banesco Banco
Universal. Its use, copy, transmission, reception or distribution is
allowed only to properly authorized people. If you received this mail
by error please destroy it and/or eliminate any copy kept in your
system and notify immediately to the sender or to the electronic mail
address mailmaster@banesco.com. You should not use the information
contained in this email for any purpose nor to share it with other
people.
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are
intended solely for the use of individual or entity to whom they are addressed.
If you are not the intended recipient or the person responsible for delivering
the electronic mail to the intended recipient, be advised that you have
received this electronic mail in error and that any use, dissemination,
forwarding, printing, or copying of this electronic mail is strictly
prohibited. If you have received this electronic mail in error, please
immediately notify the sender by return mail.
==============================================================================
|