Looks like that should work.
Cheers,
Jane
sudha g wrote:
> Hi,
> Thanks for your valuable inputs.
> I think UDP port monitoring is supported only from Netview 7.1.5.
>
> I have created a smartset like
> *Name:*
> *"Remedy" *
> *Description:*
> *"For Remedy Web Application"*
> *Rule:*
> *('IP Address' = '10.16.32.11 <http://10.16.32.11>')*
>
> Then, i have this entry in my servmon.conf file,
>
> *isRemedy|8080|Remedy|Remedy Web Server|||Remedy|5*
> **
> *The above configuration will monitor the port 8080 on server
> 10.16.32.11 <http://10.16.32.11>?*
> **
> Do we need to restart the server via *ovstop ovstart* commands after
> changing the entries in servmon.conf file?
>
>
> Thanks!
> Sudha
>
>
>
>
> On 7/5/07, *Jane Curry* <jane.curry@skills-1st.co.uk
> <mailto:jane.curry@skills-1st.co.uk>> wrote:
>
> As Senthil says, you need a SmartSet with the devices you want to
> discover running a service on port 8080. The * that you have in the
> next-to-last field in your example below, is what you replace. If
> this
> field is * then it says "test all systems that NetView knows
> about"; if
> this field is the name of an existing SmartSet, then discovery of
> your
> port 8080 will be limited to the devices in that SmartSet.
>
> Once devices are discovered, they are added to the SmartSet you have
> specified in the 3rd field (Remedy). Devices in this Remedy
> SmartSet are
> then status-polled according to the last parameter - 5 minutes in
> your
> example. You do not need the "Remedy" immediately following the
> 8080 in
> your second field - if you are doing simple port testing, then you
> simply specify the port number to be tested for - this port will
> default
> to TCP (you can put u after the port to force a UDP check but I doubt
> that is what you want).
>
> Cheers,
> Jane
>
> sudha g wrote:
> > Hi,
> >
> > I'm trying to monitor my application through port monitoring of
> > netview. My application runs in port 8080.
> > So i added an entry in servmon.conf file like this
> >
> > *isService_Remedy|8080 Remedy|Remedy|Remedy|||*|5
> > *
> > But, Netview tries to scan all my network/servers and add the
> servers
> > which has port 8080.
> > I want to monitor the port 8080 for only two hosts say
> 10.16.32.11 <http://10.16.32.11>
> > <http://10.16.32.11> and 10.18.32.1 <http://10.18.32.1>
> <http://10.18.32.1>
> >
> > Any inputs is highly appreciated.
> >
> > thnx
> > Sudha
> >
> ------------------------------------------------------------------------
>
> >
> > _______________________________________________
> > NV-L mailing list
> > NV-L@lists.ca.ibm.com <mailto:NV-L@lists.ca.ibm.com>
> > Unsubscribe:NV-L-leave@lists.ca.ibm.com
> <mailto:Unsubscribe:NV-L-leave@lists.ca.ibm.com>
> > http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access
> limited to internal IBM'ers only)
> >
>
> --
> Tivoli Certified Consultant & Instructor
> Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK.
> Registered in England & Wales, Company No. 3458854.
> Tel: +44 (0)1628 782565
> Copyright (c) 2007 Jane Curry < jane.curry@skills-1st.co.uk
> <mailto:jane.curry@skills-1st.co.uk>>. All rights reserved.
>
> _______________________________________________
> NV-L mailing list
> NV-L@lists.ca.ibm.com <mailto:NV-L@lists.ca.ibm.com>
> Unsubscribe:NV-L-leave@lists.ca.ibm.com
> <mailto:Unsubscribe:NV-L-leave@lists.ca.ibm.com>
> http://lists.ca.ibm.com/mailman/listinfo/nv-l
> <http://lists.ca.ibm.com/mailman/listinfo/nv-l> (Browser access
> limited to internal IBM'ers only)
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> NV-L mailing list
> NV-L@lists.ca.ibm.com
> Unsubscribe:NV-L-leave@lists.ca.ibm.com
> http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
> internal IBM'ers only)
>
--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK.
Registered in England & Wales, Company No. 3458854.
Tel: +44 (0)1628 782565
Copyright (c) 2007 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
reserved.
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|