Yes please, I'll appreciate if you do that. I also have scripts for other
devices, but in this case I haven't been able to find the appropriate
variable.
Thanks.
.
At 02:15 PM 6/12/98 -0400, you wrote:
>I have mixture of C programs and shell scripts that will do this. I
>have them programmed only for looking at ports with one (or less)
>machines attached to them. The trick is that there's two tables that
>need to be cross-referenced to get the same sort of output that you get
>with the "show cam" command and that the MAC addresses are listed in
>dotted decimal notation. If you'd like the scripts and programs, let me
>know.
>
>-Rich
>
>
>> -----Original Message-----
>> From: Jorge A. Jiles [SMTP:Jorge.Jiles@UALBERTA.CA]
>> Sent: Friday, June 12, 1998 2:16 PM
>> To: NV-L@UCSBVM.UCSB.EDU
>> Subject: Cisco Cat5000 bridge mib.
>>
>> I'm not sure if my first message was posted properly; so here it goes
>> again.
>>
>> >>
>> Hello there; I'm wondering if any body knows the proper mib to get the
>> physical address of stations which has been learnt on ports of a Cisco
>> 5000
>> switch?
>>
>> I looked on the standard bridge mib with no much luck; maybe there is
>> a
>> private one other than cdp since more than 70% of the devices
>> connected to
>> the switch are non cisco.
>>
>> Thanks.
>>
>> >>
>> .
>> Jorge A. Jiles
>> Network Analyst
>> Computing & Network Services
>> University of Alberta
>> Edmonton, Alberta
>> Canada
>
>
.
Jorge A. Jiles
Network Analyst
Computing & Network Services
University of Alberta
Edmonton, Alberta
Canada
|