Much we have to take into account...:-)
Good luck,
Vladimir.
S W wrote:
>
> I think I figured it out. The first problem that I noticed was that the
> database was stored on the /var/spool slice and that particular slice
> was 100% full. I increased the slice space and then I ran the following
> command to start the oserv process with the default settings 'oserv -k
> /var/spool/Tivoli/NetView.db.
>
> The oserv process started and attached itself to a port with no problem.
> Tivoli started right up for me after that. I appreciate your help and
> wish me luck.
>
> Steyland -
>
> >Date: Fri, 22 Jan 1999 17:55:11 +0100
> >Reply-To: Discussion of IBM NetView and POLYCENTER Manager on
> NetView
> > <NV-L@UCSBVM.ucsb.edu>
> >From: Vladimir Petr <petr@DATASYS.CZ>
> >Subject: Re: NetView 5.1 Restart ?
> >To: NV-L@UCSBVM.ucsb.edu
> >
> >What about the environment? Have you sourced /etc/Tivoli/setup_env.sh
> (for korn/bourne)? Then try
> >again "odadmin start <od#>". For this, you must have the super or
> senior role defined in Tivoli.
> >
> >Best regards,
> >Vladimir.
> >
> >S W wrote:
> >>
> >> Hello, Valdimir -
> >>
> >> Thx for the quick response Vladimir but the results are the same.
> >> The ovserv process wasn't running at all, I checked with a ps
> command.
> >> I attempted to start with the 'odadmin start' command that you
> mentioned
> >> and that didn't help either.
> >>
> >> Are their any other options I could try at this point?
> >>
> >> >Date: Fri, 22 Jan 1999 17:21:23 +0100
> >> >Reply-To: Discussion of IBM NetView and POLYCENTER Manager on
> >> NetView
> >> > <NV-L@UCSBVM.ucsb.edu>
> >> >From: Vladimir Petr <petr@DATASYS.CZ>
> >> >Subject: Re: NetView 5.1 Restart ?
> >> >To: NV-L@UCSBVM.ucsb.edu
> >> >
> >> >Hi, Steyland;
> >> >you are restarting oservs by "odadmin reexec all". If they are dead
> or
> >> at least the server oserv,
> >> >you will get the message which you know by now. Is server oserv
> running
> >> (run odadmin odlist to see
> >> >the status of all your tivoli managed nodes. If they have -t- flag,
> >> they are not running; or if you
> >> >get the message as previously - object dispatcher is the oserv
> daemon)?
> >> If not, run "odadmin start
> >> >all" or "odadmin start <od#>. Is it OK then?
> >> >
> >> >Best regards,
> >> >Vladimir.
> >> >
> >> >S W wrote:
> >> >>
> >> >> Good Morning -
> >> >>
> >> >> I just installed Framework 3.6 and the necessary patch for NetView
> >> 5.1.
> >> >> Upon running 'odadmin reexec all' before I restart tivoli, I get
> the
> >> >> following error; o_self: destination dispatcher unavailable. Not
> sure
> >> >> what this means as this is my first time installing Tivoli
> products.
> >> >>
> >> >> Any help on this matter would be greatly appreciated.
> >> >>
> >> >> THX in advance
> >> >>
> >> >> Steyland White
> >> >> Network Engineer
> >> >> Nortel Networks, Inc. - How the world shares ideas
> >> >> swhite@baynetworks.com
> >> >>
> >> >> ______________________________________________________
> >> >> Get Your Private, Free Email at http://www.hotmail.com
> >> >
> >> >--
> >> >Vladimir Petr
> >> >DATASYS s.r.o.
> >> >-----------------------------
> >>
> >> ______________________________________________________
> >> Get Your Private, Free Email at http://www.hotmail.com
> >
> >--
> >Vladimir Petr
> >DATASYS s.r.o.
> >-----------------------------
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
--
Vladimir Petr
DATASYS s.r.o.
-----------------------------
|