That's great ! would appriated you can send me a config. produres of 2220
event window, thanks!
Michael Tsai
ITAP-SSR-RS/6000 & AIX,
Availability Service
IBM Taiwan Corporation,
206, Sec. 1, Keelung Rd., Taipei, Taiwan, R.O.C.
Tel: 886-2-7259365, Fax: 886-2-7201499
Notes ID: MICTSAI/Taiwan/IBM, Internet ID: mictsai@tw.ibm.com
Craig Morgan <craig.morgan@MINDSPRING.COM> on 99/02/04 10:46:42 PM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: Michael Tsai/Taiwan/IBM)
Subject: Re: NetView Daemon did not running - sfevents
Its been a while since I worked on a NBBS installation, but the sfevent
daemon should be down. It becomes active when there ie a change or error
sent to the NMS. Remember CMIP is not like SNMP. I have instruction on how
to set up the events windows for the 2220. Email me if you are interested.
craig.morgan@mindspring.com
----- Original Message -----
From: Michael Tsai <mictsai@TW.IBM.COM>
To: <NV-L@UCSBVM.ucsb.edu>
Sent: Monday, February 01, 1999 12:27 PM
Subject: Re: NetView Daemon did not running - sfevents
>Thanks for your kindly reply for my inquiry of "sfevents daemon did not
>running",
> Yes, I have two sets of 2220 installed , I used NetView V5.0 and NBBS
>V1.7.1 to
> monitor the 2220 network, you mentioned about that daemon getting
>start with
> NetView GUI, and getting event from 2220, if it did not run, which
meant
>2220
> not receive any 2220 event? am I right? If I'm wrong, pls tell me how
to
>start
> the "sfevents" daemon after start NetView GUI interface. or I just
leave
>it alone,
> don't care it, once the 2220 receive the network event, then the
>sfevents daemon
> will start automatically!
> By the way, I have an another question about NetView's control desk
> "CMIP" event message, why it just show blank always? no any 2220 CMIP
> event show up in control desk? is that a normal condition? or I need to
> enable some NetView/NBBS function to start the event collection?
> does it also related into sfevents daemon?
> Hope somebody can give me advise, thanks!
>
>Michael Tsai
> ITAP-SSR-RS/6000 & AIX,
> Availability Service
>IBM Taiwan Corporation,
> 206, Sec. 1, Keelung Rd., Taipei, Taiwan, R.O.C.
> Tel: 886-2-7259365, Fax: 886-2-7201499
> Notes ID: MICTSAI/Taiwan/IBM, Internet ID: mictsai@tw.ibm.com
>
>
>
>Carsten Strahler <Carsten.Strahler@NBG.NET> on 99/02/04 07:54:06 PM
>
>Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView <NV-L@UCSBVM.UCSB.EDU>
>
>To: NV-L@UCSBVM.UCSB.EDU
>cc: (bcc: Michael Tsai/Taiwan/IBM)
>Subject: Re: NetView Daemon did not running - sfevents
>
>
>
>
>
>This is normal. The daemon sfevents starts together with the Netview GUI.
>Its the daemon for getting events from the 2220. So you get only events
>from the 2220 when the Netview GUI ist started.
>Statement of IBM support : "Works as designed"
>
>
>Carsten Strahler
>
>
>
>
>
>craig.morgan@MINDSPRING.COM on 03.02.99 21:31:07
>
>Bitte antworten an NV-L@UCSBVM.ucsb.edu
>
>An: NV-L@UCSBVM.ucsb.edu
>Kopie: (Blindkopie: Carsten Strahler/nbg/DE)
>Thema: Re: NetView Daemon did not running - sfevents
>
>
>
>
>If I am not mistaken I believe the sfevents is a daemon for your NBBS. Did
>you upgrade from a pervious version of NetView? Do you have 2220s in your
>network? The NBBS is used to manage them. If I am correct, depending on
>what version of NBBS you are running it will not run on NetView V5.1.
>
>-----Original Message-----
>From: Discussion of IBM NetView and POLYCENTER Manager on NetView
>[mailto:NV-L@UCSBVM.ucsb.edu] On Behalf Of James Shanks
>Sent: Wednesday, February 03, 1999 12:25 PM
>To: NV-L@UCSBVM.ucsb.edu
>Subject: Re: NetView Daemon did not running - sfevents
>
>You are mistaken. NetView does not now have, nor has it ever had, a
>daemon called "sfevents". I don't know what it is, or where you got it
>from, but we do not ship it.
>
>I suggest you look at the ovsuf file in /usr/OV/conf and find out what
>the full path is to the binary executable which this daemon references.
>That may tell you who owns it.
>
>
>By the way, NetView 5.0 is not supported on Framework 3.6. You should
>have installed NetView 5.1
>
>James Shanks
>Tivoli (NetView for UNIX) L3 Support
>
>
>
>Michael Tsai <mictsai@TW.IBM.COM> on 02/01/99 10:56:19 AM
>
>Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView <NV-L@UCSBVM.ucsb.edu>
>
>To: NV-L@UCSBVM.ucsb.edu
>cc: (bcc: James Shanks)
>Subject: NetView Daemon did not running - sfevents
>
>
>
>
>
>Hello!
>
> Env: AIX V4.2.1 with Y2k PTFs, NBBS V1.7.1, Netview V5.0, Tivoli Frame
>work V3.6
>
> I faced a problem after installed Net V5.0, which is the NetView's
>daemon - sfevents
> did not running, the detail error as following:
>
> Object manager name: Registered daemons are not running
> Behavior: OVs_NON_WELL_BEHAVED
> State: NOT_RUNNING
> PID: 31782
> Exit status: exit(1)
>
> Would appreciated anyone can me some advise for what's going on.
>Michael Tsai
> ITAP-SSR-RS/6000 & AIX,
> Availability Service
>IBM Taiwan Corporation,
> 206, Sec. 1, Keelung Rd., Taipei, Taiwan, R.O.C.
> Tel: 886-2-7259365, Fax: 886-2-7201499
> Notes ID: MICTSAI/Taiwan/IBM, Internet ID: mictsai@tw.ibm.com
|