Alain:
I do have deferent adapters pointing to different subnets. When I use smitty
to config the adapters default gateway, it changes the default gateway for all
adapters to the same gateway address. If anyone knows of a way to avoid this,
please let me know.
Gil Irizarry
>>> "MENEZES, ALAIN" <a.menezes@ASLK-CGER.BE> 04/16 9:31 AM >>>
What if the adapters are in different subnets and use different default
gateways ?
---------------------
Alain Menezes
ASLK-CGER Services GIE Tel.: +32 2 228.55.74
Rue Fossé-aux-Loups, 48 Fax.: +32 2 228.83.69
1000 Bruxelles Email:
a.menezes@aslk-cger.be
> -----Original Message-----
> From: Gil Irizarry [SMTP:IRIZARRG@LABS.WYETH.COM]
> Sent: vendredi 16 avril 1999 15:23
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: Re: AW: 2 Network adapters
>
> Ralph:
> When looking at your TCP/IP configuration for the two adapters, do
> they share the same default gateway?. I have FDDI & ETH, but, the
> configuration for each have the same default gateway. When I change
> one, the other get updated also with the same IP address for default
> gateway. I have my routers with two entries for the snmp-server
> utilizing the two different adapters on my AIX 4.3.2 NV5..1 server. I
> believe that all request from the box go out on the adapter with the
> same subnet as the default gateway.
> GIl Irizarry
>
> >>> Schiffinger Ralph 2100 <Ralph.Schiffinger@ERSTEBANK.AT> 04/16 5:42
> AM >>>
> None i could think of.
> Running my server with 2 adapters.
> Adapter 1 is TokenRing, doing my manage-the-manager-traffic.
> Adapter 2 is Fddi, doing my manage-the-network-traffic.
> Nullo problemo.
> Cordially, Ralph.
> iT-AUSTRIA / OE2100 / TK-NET
> Tel (mobil) 0664 1908469
> Tel (iT-A) 21717 58948
> FAX (iT-A) 21717 58979
> Mailto:Ralph.Schiffinger@erstebank.at
>
>
> -----Ursprüngliche Nachricht-----
> Von: MENEZES, ALAIN [SMTP:a.menezes@ASLK-CGER.BE]
> Gesendet am: Freitag, 16. April 1999 12:24
> An: NV-L@UCSBVM.ucsb.edu; Schiffinger Ralph 2100
> Betreff: 2 Network adapters
>
>
> Hi all,
>
> I'm thinking of configuring a second network adapter on my NetView
> server; it will be connected to another subnet, but will be able to
> see
> all the subnets the 1st one can ....
> Are there any know problems/issues regarding the way NetView will
> (populate,) manage the DB ?
>
> Any info will be appreciated.
>
> Thanks
> ---------------------
> Alain Menezes
> ASLK-CGER Services GIE Tel.: +32 2 228.55.74
> Rue Fossé-aux-Loups, 48 Fax.: +32 2
> 228.83.69
> 1000 Bruxelles Email:
> a.menezes@aslk-cger.be
|