Hi James
first thanks for your help.Yes it is right i am new to TEC part of Tivoli
stuff.
I have netview 5.1 on windows NT workstation 4.0. I am just developing new
plugins for xerox printers.No i didn't install TEC server.I have sql server
6.5 on my machine.
so what are the different steps or module( b'cos there are so many CDs comes
with this package, it is bit difficult to select proper one for your use) is
required to install on your machine to get the events in the TEC from
Netview.
Right now i can able to see my customize events in the event broswer.
Thanks a lot.I really need your help.
regards
sanjeev
-----Original Message-----
From: James Shanks [mailto:James_Shanks@TIVOLI.COM]
Sent: Monday, April 12, 1999 4:42 PM
To: NV-L@UCSBVM.UCSB.EDU
Subject: Re: Problem regarding the TME 10 and Event Server!!
Sanjeev -
You already have a TEC server installed somewhere, correct? If not, that
is a major undertaking. And you need a relational database to store the
TEC events in. And that requires Tivoli's RIM as well.
If you have a TEC server, then setting up a TEC adapter should not be too
traumatic, since the process is similar to what you use setting up the
adapters which ship with TEC. In fact, we usually point folks to TEC
event adapters guide when they have questions about how the NetView event
adapter works on NT. Is someone in your shop familiar with TEC and its
adapters?
But your NT box does not require the Framework if you use the unsecured or
non-TME adapter and it does not need to be a TEC console. And it probably
isn't big enough to be the TEC server. It is not advisable to NetView and
the TEC server on the same box. However, if you want to put a TEC console
on your NT box, then it must also have the Framework installed. The TEC
consoles and server communicate via the Framework.
Let me know if you follow all this, because it sounds as if the Tivoli
environment is wholly new to you.
James Shanks
Tivoli (NetView for UNIX) L3 Support
"Sharma, Sanjeev" <Sanjeev.Sharma@USA.XEROX.COM> on 04/12/99 04:03:42 PM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: James Shanks)
Subject: Re: Problem regarding the TME 10 and Event Server!!
should i also require to install TEC and Framework also?
-----Original Message-----
From: Doug Horn [mailto:Doug_Horn@HSBC.CA]
Sent: Monday, April 12, 1999 3:46 PM
To: NV-L@UCSBVM.UCSB.EDU
Subject: Re: Problem regarding the TME 10 and Event Server!!
Subject: Problem regarding the TME 10 and Event
Hi
You will use the tecad_nv6k adapter to do this. The Netview documentation
gives step by step instructions on how to do this. You will have to modify
the tecad_nv6k.conf, .oid and .cds files to get events forwarded.
Be aware that if you are using Netview 5.1 for NT that there is a known
problem with the trapd daemon and its ability to pass all events to TEC.
It will only pass generic SNMP events and events created using the 'event'
command. all others will not get forwarded. Tivoli is working on a patch
for this.
dug
Hi to all
I want to forwarded my event from NetView to TEC.I am working on the
Windows
NT4.0 OS.
What are the different module to be essential to imstall before performing
this operation?
Please reply ASAP.
Thanks a lot for any pointer.
regards
sanjeev
|