Subject: Re: Problem regarding the TME 10 and Event Server!!
You do not need to install framework on the Netview box if you run the
tecad_nv6k adapter in unsecure mode. You have to install TEC or what would
you forward the alerts from Netview to?
should i also require to install TEC and Framework also?
-----Original Message-----
From: Doug Horn [mailto:Doug_Horn@HSBC.CA]
Sent: Monday, April 12, 1999 3:46 PM
To: NV-L@UCSBVM.UCSB.EDU
Subject: Re: Problem regarding the TME 10 and Event Server!!
Subject: Problem regarding the TME 10 and Event
Hi
You will use the tecad_nv6k adapter to do this. The Netview documentation
gives step by step instructions on how to do this. You will have to modify
the tecad_nv6k.conf, .oid and .cds files to get events forwarded.
Be aware that if you are using Netview 5.1 for NT that there is a known
problem with the trapd daemon and its ability to pass all events to TEC.
It will only pass generic SNMP events and events created using the 'event'
command. all others will not get forwarded. Tivoli is working on a patch
for this.
dug
Hi to all
I want to forwarded my event from NetView to TEC.I am working on the
Windows
NT4.0 OS.
What are the different module to be essential to imstall before performing
this operation?
Please reply ASAP.
Thanks a lot for any pointer.
regards
sanjeev
|