Hi All:
Thank a lot, for all yours suggestions.
Sergio Cardona.
Steve Francis wrote:
>
> UNIX uses all available memory, all the time. Memory that is not grabbed by
> processes will be used as a file cache, so having very little free memory is
> normal and unavoidable (and a good thing, not a bad thing.)
>
> Your system shows very little swapping, so I would say it is not low on
> memory at all. If you want more detailed information, go get a tool like
> monitor.
>
> Sergio Cardona F wrote:
>
> > Hi All:
> >
> > I need help, We have detected a rare (????) behavior with our machine:
> >
> > We have a Risc/6000 H50 with 2 processors and 1Gb RAM, with aix 4.3.2.
> > We have installed netview 5.1.1, the database has 26000 objects and the
> > ovwdb has configured its memory cache in 30000.
> > we have 11 background maps and 1 or 2 operators. the operators are
> > conected via a X Client.
> >
> > We had noticed that the memory was low ( the system had 512Mb RAM), when
> > We increased
> > the memory to 1Gb the system has remained using the total amount of
> > memory.
> >
> > Antioquia@root:/>vmstat 3
> > kthr memory page faults cpu
> > ----- ----------- ------------------------ ------------ -----------
> > r b avm fre re pi po fr sr cy in sy cs us sy id wa
> > 0 1 155166 121 0 0 0 4 12 0 134 535 102 3 2 90 5
> > 0 2 155167 120 0 6 0 15 19 0 273 2274 387 8 2 86 4
> > 0 2 155167 155 0 0 0 3 4 0 258 1139 202 2 2 96 1
> > 0 2 155167 151 0 0 0 0 0 0 247 825 146 1 0 98 1
> > 0 2 155167 143 0 0 0 0 0 0 264 1313 217 3 2 95 0
> > 0 2 155169 120 0 1 0 0 0 0 274 1988 357 8 3 86 2
> >
> > Is this normal ?
> >
> > Is There a way to limit the number of memory used by NetView ?
> >
> > We are worried about the memory performance , because we need to install
> > Cisco Works 2000 and Nways manager in the same machine.
> >
> > Is this memory enough to support all software in the machine?
> >
> > Thanks and Regards,
> >
> > Sergio Cardona.
|