Hi Ken, I was also just about to look into the CIM mib for the
following info. when I came across your append.
1. Can we look into NT Services status from Netview using the CIM mib?
2. Can I look at NT's file system status. Like disk drive capacity,
space availability on each drive, File System its running (NTFS or FAT)
etc.
When I added compaq mibs in the netview, it didn't add any Private
Enterprise mib objects that could possibly contain this information so
I don't believe I can, but if anybody could verify that.
Or is this information available in any of Microsoft's MIB. If yes then
what are the relevent MIB files and where to get them.
Regards
Kashif
--- "Ken Garst." <KGarst@GIANTOFMARYLAND.COM> wrote:
> There is not just one Compaq Insight Manager MIB, in
> fact there is about 12-14,
> I forget which. The Insight Manager also has a
> hardware piece called the remote
> insight manager board which is installed on your
> Compaq servers.
>
> The Insight Manager software integrates into NetView
> as a "MIB application", as
> Monitor-->Compaq-->24 individual options such as:
> hardware asset info
> system information
> hardware configuration
> hardware utilization
> os utilization
> host OS configuration
> hard disk errors
> hard disk statistics
> IDE SMART status
> SCSI status
> environment
> fault information,
> etc...
>
> The data for each of these queries uses one or more
> of the Compaq MIBs. I also
> customized some 250 Compaq-specific traps that can
> appear in the Control Desk.
>
> Regards,
> ken
> kgarst@giantofmaryland.com
>
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
|