nv-l
[Top] [All Lists]

Re: Fwd: [RE: Forwarding events from Netview to TEC]

To: nv-l@lists.tivoli.com
Subject: Re: Fwd: [RE: Forwarding events from Netview to TEC]
From: James_Shanks@tivoli.com
Date: Mon, 27 Nov 2000 13:18:30 -0500
Is you TEC server on UNIX or NT?  The default port for the TEC server to
listen on is 5529, but for UNIX, TEC events are sent to port 0, which is
owned by the portmapper daemon, who reroutes them.  If you aren't running
portmapper or you have an NT TEC server, which doesn't have a portmapper,
then you must add a stanza to the tecint.conf file while identifies what
port the TEC server is listening to.  See the man page on tecint.conf on
your UNIX box for more details (that's what I advised Carlos to do).  You
must know something about your TEC setup for this to work correctly.
I also told Carlos in my append last week on this same topic that he should
look in /etc/Tivoli/tec/cache and see if that file is growing.  If so, it
means that nvserverd on your NetView box cannot open a session with the TEC
server specified in your tecint.conf.  Once he does the cache is sent at
once and cleared.  So that is your clue that you have more work to do to
get the connection established.

James Shanks
Team Leader, Level 3 Support
 Tivoli NetView for UNIX and NT



"Bursik, Scott" <Scott.Bursik@fritolay.com> on 11/27/2000 01:01:30 PM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

To:   IBM NetView Discussion <nv-l@tkg.com>
cc:    (bcc: James Shanks/Tivoli Systems)
Subject:  Re: Fwd: [RE: [NV-L] Forwarding events from Netview to TEC]





     Is Port=5524 the default port for TEC to receive events on? I am
having the same issue. I have selected the Forwardall.rs and configured
NetView to forward events in Server Setup and set up to forward traps in
event configuration. When I run the wtdumper command I don't see any events
come through. I am using the Send Event to Trapd daemon in Server Setup to
create the events.
     Thanks.

     NetView 6.0.1 AIX 4.3.2






     Carlos Enriquez Bolio <enriquezc@usa.net>
     11/27/2000 11:30 AM
     Please respond to IBM NetView Discussion
<nv-l@tkg.com>@SMTP@Exchange
     To:  nv-l@tkg.com@SMTP@Exchange
     cc:
     Subject:  Fwd: [RE: [NV-L] Forwarding events from Netview to
TEC]

     I have found the problem: I was missing to define the parameter
Server
     Port=5524 in the  /usr/OV/conf/tecint.conf  file.

     Thanks.Saludos.

     Carlos Enriquez
     IS Dept.
     Nestle Mexico.

     ____________________________________________________________________
     Get free email and a permanent address at
http://www.netaddress.com/?N=1 <<{{MSG001.RTF>>



Attachment: {{MSG001.RTF
Description: Rich Text Format





<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web