RE: DPU Nodes reported Down/Up by Netmon

[z_esm_karekars <z_esm_karekars@bharatpetroleum.com>]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

Hi,

I tried setting the SNMP polling interval and timeout as high as possible
but still trapd.log gets updated with Netmon events for these DPU's at very
fast Down/Up events. Where else could be the problem.

Regards,
Santosh

> ----------
> From:         Jane Curry[SMTP:jane.curry@skills-1st.co.uk]
> Reply To:     IBM NetView Discussion
> Sent:         Thursday, September 13, 2001 3:26 PM
> To:   IBM NetView Discussion
> Subject:      Re: [NV-L] DPU Nodes reported Down/Up by Netmon
> 
> Put an entry for these devices in your ovsnmp.conf (Options -> SNMP
> Configuration).  I would suggest increasing both the timeout interval and
> also, perhaps, the retries if the lines are a loss-y. 
> Cheers, 
> Jane 
> z_esm_karekars wrote: 
> 
>         
> 
>       Hi, 
> 
>       I have Netview 6.0.1 on AIX 4.3.3 
> 
>       We have almost 180 DPU (SNMP Not supported) locations on slow link
> in our Wide Network. It is reported in trapd.log that very frequently they
> go Down and come Up so fast (which could be because of slow link
> response). If I do a query to database for these DPU's Up/Down status, it
> becomes a huge and non relevent data. 
> 
>       Can I have some solution for this so that the genuine DPU Down and
> Up will be reported to trapd.log 
> 
>       Regards, 
>       Santosh
> 
> -- 
> Tivoli Certified Enterprise Consultant & Instructor 
> Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK 
> Tel: +44 (0)1628 782565 
> Copyright (c) 2001 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights
> reserved. 
>  
>

Hi,

I tried setting the SNMP polling interval and timeout as high as possible but still trapd.log gets updated with Netmon events for these DPU's at very fast Down/Up events. Where else could be the problem.

Regards,
Santosh

----------
From:   Jane Curry[SMTP:jane.curry@skills-1st.co.uk]
Reply To:       IBM NetView Discussion
Sent:   Thursday, September 13, 2001 3:26 PM
To:     IBM NetView Discussion
Subject:        Re: [NV-L] DPU Nodes reported Down/Up by Netmon

Put an entry for these devices in your ovsnmp.conf (Options -> SNMP Configuration).  I would suggest increasing both the timeout interval and also, perhaps, the retries if the lines are a loss-y.

Cheers,
Jane
z_esm_karekars wrote:

 

Hi,

I have Netview 6.0.1 on AIX 4.3.3

We have almost 180 DPU (SNMP Not supported) locations on slow link in our Wide Network. It is reported in trapd.log that very frequently they go Down and come Up so fast (which could be because of slow link response). If I do a query to database for these DPU's Up/Down status, it becomes a huge and non relevent data.

Can I have some solution for this so that the genuine DPU Down and Up will be reported to trapd.log

Regards,
Santosh

--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2001 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights reserved.