| To: | nv-l@lists.tivoli.com |
|---|---|
| Subject: | RE: Copying Database from 601 to 602 |
| From: | "James Shanks" <SHANKS@us.tivoli.com> |
| Date: | Thu, 18 Oct 2001 14:23:26 -0400 |
This is a multipart message in MIME format. Well, Jim, I am as puzzled as I can be. Perhaps someone else has an
answer. But I have personally seen databases moved from a 6.0.1 to a
6.0.2 box (Support does this kind of this all the time, but I haven't
recently ). So what can you do? Well, you could try getting a new tar
file from the original machine and trying this again. You could also do
"ovwls" on your 6.0.2 machine and see what it tells you. It should give
you back the complete hostname of the box it thinks your map is on. I
would expect it to be fully qualified if you are using DNS. Other than
that, I am at a loss to suggest anything except to call Support. This
isn't my area and I don't understand why this is not working.
Sorry
James Shanks
Level 3 Support
Tivoli NetView for UNIX and NT
Tivoli Software
IBM Software Group
Please note that my new id is jshanks@us.ibm.com
"Bingen, Jim D" <Jim.Bingen@nav-international.com>
Sent by: owner-nv-l@tkg.com
10/18/2001 12:30 PM
Please respond to IBM NetView Discussion
To: "'IBM NetView Discussion'" <nv-l@tkg.com>
cc:
Subject: RE: [NV-L] Copying Database from 601 to 602
/#mapadmin -l
Map Name Map State Mapdb Timestamp
-------- --------- ---------------
default Valid 976044453
/#mapadmin -u brkmsx02
/#mapadmin -u default:brkmsx02
/#
When I start Netview, I get the same error message ? "Could not open map:
default. Map exists on machine: 5xx".
Jim Bingen
International Truck and Engine Corp.
Staff Specialist, Network Support Services
P(262)780-5345
F(262)780-5376
mailto:jim.bingen@nav-international.com
-----Original Message-----
From: James Shanks [mailto:SHANKS@us.tivoli.com]
Sent: Thursday, October 18, 2001 10:55 AM
To: IBM NetView Discussion
Subject: RE: [NV-L] Copying Database from 601 to 602
Jim -
I was asking about the mapadmin command, not about reset_ci. The error is
about the map.
As Steve Hochstedtler indicated, the relevant question is about the maps
themselves.
What do you get when you issue mapadmin -l?
What do you get when you try mapadmin -u <hostname> or mapadmin -u
default:,hostname ?
James Shanks
Level 3 Support
Tivoli NetView for UNIX and NT
Tivoli Software
IBM Software Group
Please note that my new id is jshanks@us.ibm.com
"Bingen, Jim D" <Jim.Bingen@nav-international.com>
Sent by: owner-nv-l@tkg.com
10/18/2001 10:22 AM
Please respond to IBM NetView Discussion
To: "'IBM NetView Discussion'" <nv-l@tkg.com>
cc:
Subject: RE: [NV-L] Copying Database from 601 to 602
Netview 601 system -
ovstop
tar -cvf nvdb.bak01.tar /usr/OV/databases/openview
ovstart
Netview 602 system -
ovstop
pax -rp e -f nvdb.bak01.tar
/#/usr/OV/service/reset_ci
Start of reset_ci, after successful completion
you will receive a reset_ci finished message.
Reregistering /usr/OV/lrf/ovesmd.lrf...
ovaddobj - Static Registration Utility
WARNING: LRF record #3 conflicts with existing entry--not added. (OVs
1-17)
WARNING: LRF record #4 conflicts with existing entry--not added. (OVs
1-17)
Successful Completion
Reregistering /usr/OV/lrf/ovelmd.lrf...
ovaddobj - Static Registration Utility
Successful Completion
tmf_client_init: o_errs:0014 destination dispatcher unavailable
Unable to update the label for the NetView server icon.
reset_ci finished
/#
/#ovstart
/#ovstatus
object manager name: OVsPMD
behavior: OVs_PMD
state: RUNNING
PID: 14728
exit status: -
object manager name: ovwdb
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 16008
last message: Initialization complete.
exit status: -
object manager name: nvsecd
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 14966
last message: Initialization complete.
exit status: -
object manager name: pmd
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 4762
last message: pmd completed initialization
exit status: -
object manager name: OVORS_M
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 18062
last message: orsd completed initialization
exit status: -
object manager name: trapd
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 18320
last message: Initialization complete.
exit status: -
object manager name: ovtopmd
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 17548
last message: Initialization complete.
exit status: -
object manager name: trapgend
behavior: OVs_NON_WELL_BEHAVED
state: RUNNING
PID: 16350
exit status: -
object manager name: mgragentd
behavior: OVs_NON_WELL_BEHAVED
state: RUNNING
PID: 17082
exit status: -
object manager name: ovactiond
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 18580
last message: Initialization complete.
exit status: -
object manager name: nvcorrd
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 18836
last message: Initialization complete
exit status: -
object manager name: nvpagerd
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 14494
last message: PMD initialization complete
exit status: -
object manager name: actionsvr
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 20386
last message: Initialization complete
exit status: -
object manager name: nvserverd
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 19358
last message: Initialization complete.
exit status: -
object manager name: nvcold
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 16772
last message: Initialization complete.
exit status: -
object manager name: snmpCollect
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 19098
last message: Initialization complete.
exit status: -
object manager name: nvlockd
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 17290
last message: Initialization complete.
exit status: -
object manager name: netmon
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 20218
last message: Initialization complete.
exit status: -
object manager name: C5d
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 29930
last message: Initialization complete
exit status: -
object manager name: ems_sieve_agent
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 29412
last message:
exit status: -
object manager name: ems_log_agent
behavior: OVs_WELL_BEHAVED
state: RUNNING
PID: 29670
last message:
exit status: -
/#nv6000
portmap is already running
Starting Tivoli NetView daemons :
Daemon startup completed
Starting user interface applications...
Wed Oct 17 15:54:27 CDT 2001
Please see //nv6000.log if you have startup errors.
/#
At this point the Tivoli NetView screen comes up, it says Initializing...
accross the bottom, and when Opening Map comes up, I get a pop up window
that says "Could not open map: default. Map exists on machine: 5xx"
When I click the OK button, both screens exit. I will include the
nv6000.log.
Jim Bingen
International Truck and Engine Corp.
Staff Specialist, Network Support Services
P(262)780-5345
F(262)780-5376
mailto:jim.bingen@nav-international.com
-----Original Message-----
From: James Shanks [mailto:SHANKS@us.tivoli.com]
Sent: Wednesday, October 17, 2001 2:05 PM
To: IBM NetView Discussion
Subject: RE: [NV-L] Copying Database from 601 to 602
Then you may have to talk to support some more because mapadmin -u, if
entered correctly, should have fixed it.
There is no theoretical reason why data cannot be transported between
6.0.1 and 6.0.2, unless the original tar was bad. And reset_ci also does
the mapadmin command under the covers so there is usually no reason to do
it afterward.
What exactly did you enter and what exactly did you get back?
James Shanks
Level 3 Support
Tivoli NetView for UNIX and NT
Tivoli Software
IBM Software Group
Please note that my new id is jshanks@us.ibm.com
"Bingen, Jim D" <Jim.Bingen@nav-international.com>
Sent by: owner-nv-l@tkg.com
10/17/2001 02:40 PM
Please respond to IBM NetView Discussion
To: "'IBM NetView Discussion'" <nv-l@tkg.com>
cc:
Subject: RE: [NV-L] Copying Database from 601 to 602
I tried the mapadmin ?u command but it didn't help. I still received the
same error message.
-----Original Message-----
From: CATALINA MARTINEZ [mailto:CATALINA.MARTINEZ@tlc.state.tx.us]
Sent: Wednesday, October 17, 2001 12:42 PM
To: nv-l@tkg.com
Subject: Re: [NV-L] Copying Database from 601 to 602
Jim,
you may try:
mapadmin -u mapname:hostname.
I moved my db from 6.0 to 6.02 and did not have this particular problem.
But I came across this command when I was searching this list on the
procedures to do it.
I dont know if it still works.
Catalina
>>> Jim.Bingen@NAV-INTERNATIONAL.com 10/17/01 11:46AM >>>
I am moving from Netview version 6.0.1 on AIX 4.3.3, to Netview 6.0.2 also
on AIX 4.3.3. I tried copying the database files using the tar/pax method
recommended by Leslie, did a reset_ci, did the ovw
-fields/-verify/-config,
but I am getting the error "Could not open map: default. Map exists on
machine 5xx". I called support (PMR 78535,379) but they did not think I
could copy the database between versions 601 and 602.
Has anybody tried this? Any luck?
Thanks.
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
#### nv6000.log has been removed from this note on October 18 2001 by
James Shanks
Well, Jim, I am as puzzled as I can be. Perhaps someone else has an answer. But I have personally seen databases moved from a 6.0.1 to a 6.0.2 box (Support does this kind of this all the time, but I haven't recently ). So what can you do? Well, you could try getting a new tar file from the original machine and trying this again. You could also do "ovwls" on your 6.0.2 machine and see what it tells you. It should give you back the complete hostname of the box it thinks your map is on. I would expect it to be fully qualified if you are using DNS. Other than that, I am at a loss to suggest anything except to call Support. This isn't my area and I don't understand why this is not working. Sorry James Shanks Level 3 Support Tivoli NetView for UNIX and NT Tivoli Software IBM Software Group Please note that my new id is jshanks@us.ibm.com
/#mapadmin -l Map Name Map State Mapdb Timestamp -------- --------- --------------- default Valid 976044453 /#mapadmin -u brkmsx02 /#mapadmin -u default:brkmsx02 /#
When I start Netview, I get the same error message – "Could not open map: default. Map exists on machine: 5xx".
-----Original Message-----
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | RE: Interface name/ip status Changing?, Barr, Scott |
|---|---|
| Next by Date: | RE: Interface name/ip status Changing?, Scott Bursik |
| Previous by Thread: | RE: Copying Database from 601 to 602, Bingen, Jim D |
| Next by Thread: | RE: Copying Database from 601 to 602, CATALINA MARTINEZ |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Archive operated by Skills 1st Ltd
See also: The NetView Web