RE: Copying Database from 601 to 602

["James Shanks" <SHANKS@us.tivoli.com>]

This is a multipart message in MIME format.

Then you may have to talk to support some more because mapadmin -u, if 
entered correctly, should have fixed it.
There is no theoretical reason why data cannot be transported between 
6.0.1 and 6.0.2, unless the original tar was bad.  And reset_ci also does 
the mapadmin command under the covers so there is usually no reason to do 
it afterward.

What exactly did you enter and what exactly did you get back?

James Shanks
Level 3 Support 
Tivoli NetView for UNIX and NT
Tivoli Software
IBM Software Group
Please note that my new id is jshanks@us.ibm.com






"Bingen, Jim D" <Jim.Bingen@nav-international.com>
Sent by: owner-nv-l@tkg.com
10/17/2001 02:40 PM
Please respond to IBM NetView Discussion

 
        To:     "'IBM NetView Discussion'" <nv-l@tkg.com>
        cc: 
        Subject:        RE: [NV-L] Copying Database from 601 to 602

 

I tried the mapadmin ?u command but it didn't help. I still received the 
same error message.
 
 
-----Original Message-----
From: CATALINA MARTINEZ [mailto:CATALINA.MARTINEZ@tlc.state.tx.us]
Sent: Wednesday, October 17, 2001 12:42 PM
To: nv-l@tkg.com
Subject: Re: [NV-L] Copying Database from 601 to 602
 
Jim,
 
you may try:
 
mapadmin -u mapname:hostname.
 
I moved my db from 6.0 to 6.02  and did not have this particular problem. 
But I came across this command when I was searching this list on the 
procedures to do it.
 
I dont know if it still works.
 
Catalina


>>> Jim.Bingen@NAV-INTERNATIONAL.com 10/17/01 11:46AM >>>
I am moving from Netview version 6.0.1 on AIX 4.3.3, to Netview 6.0.2 also
on AIX 4.3.3. I tried copying the database files using the tar/pax method
recommended by Leslie, did a reset_ci, did the ovw 
-fields/-verify/-config,
but I am getting the error "Could not open map: default. Map exists on
machine 5xx". I called support (PMR 78535,379) but they did not think I
could copy the database between versions 601 and 602.

Has anybody tried this? Any luck?

Thanks.


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


Then you may have to talk to support some more because mapadmin -u, if entered correctly, should have fixed it.
There is no theoretical reason why data cannot be transported between 6.0.1 and 6.0.2, unless the original tar was bad.  And reset_ci also does the mapadmin command under the covers so there is usually no reason to do it afterward.

What exactly did you enter and what exactly did you get back?

James Shanks
Level 3 Support  
Tivoli NetView for UNIX and NT
Tivoli Software
IBM Software Group
Please note that my new id is jshanks@us.ibm.com

"Bingen, Jim D" <Jim.Bingen@nav-international.com> Sent by: owner-nv-l@tkg.com 10/17/2001 02:40 PM Please respond to IBM NetView Discussion

To:        "'IBM NetView Discussion'" <nv-l@tkg.com>         cc:                 Subject:        RE: [NV-L] Copying Database from 601 to 602

I tried the mapadmin –u command but it didn't help. I still received the same error message.

 

 

-----Original Message-----
From: CATALINA MARTINEZ [mailto:CATALINA.MARTINEZ@tlc.state.tx.us]
Sent: Wednesday, October 17, 2001 12:42 PM
To: nv-l@tkg.com
Subject: Re: [NV-L] Copying Database from 601 to 602

 

Jim,

 

you may try:

 

mapadmin -u mapname:hostname.

 

I moved my db from 6.0 to 6.02  and did not have this particular problem. But I came across this command when I was searching this list on the procedures to do it.

 

I dont know if it still works.

 

Catalina

>>> Jim.Bingen@NAV-INTERNATIONAL.com 10/17/01 11:46AM >>>
I am moving from Netview version 6.0.1 on AIX 4.3.3, to Netview 6.0.2 also
on AIX 4.3.3. I tried copying the database files using the tar/pax method
recommended by Leslie, did a reset_ci, did the ovw -fields/-verify/-config,
but I am getting the error "Could not open map: default. Map exists on
machine 5xx". I called support (PMR 78535,379) but they did not think I
could copy the database between versions 601 and 602.

Has anybody tried this? Any luck?

Thanks.


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l