To: | nv-l@lists.tivoli.com |
---|---|
Subject: | RE: ISDN port colour problem through Netview |
From: | "Leslie Clark" <lclark@us.ibm.com> |
Date: | Tue, 13 Nov 2001 09:50:58 -0500 |
Anupam, I don't require any data but the support center might. I think this has gone on long enough that you should call them. There has been at least one suggestion that there might be a problem with this on NT; I have seen it work just fine on your platform, AIX. I cannot tell from your data whether you are looking at the correct index, but the demandpoll seems to show some confusion. I would contact Tivoli Support and have them help you investigate this. Cordially, Leslie A. Clark IBM Global Services - Systems Mgmt & Networking Detroit anand anupam <ananda@bharatpetr To: IBM NetView Discussion <nv-l@tkg.com> oleum.com> cc: Sent by: Subject: RE: [NV-L] ISDN port colour owner-nv-l@tkg.com problem through Netview 11/13/01 02:52 AM Please respond to IBM NetView Discussion Hi, I am herewith attaching 4 files and hope this may through some light. The ip address of pink interface is 192.168.168.40 on SEWREE router with instance no 3. The IP address of color interface is 192.168.168.34 on BPTCRT with interface no. 3 Please write back, if you require some other data. Regds...............Anupam -----Original Message----- From: Leslie Clark [mailto:lclark@US.IBM.COM] Sent: Monday, November 12, 2001 6:03 PM To: IBM NetView Discussion Subject: RE: [NV-L] ISDN port colour problem through Netview Anupam, can you report here exactly what the values for both Oper and Admin are for the two interfaces that are shown differently? Use the mib browser to get them numerically. Cordially, Leslie A. Clark IBM Global Services - Systems Mgmt & Networking Detroit anand anupam <ananda@bharatpetr To: IBM NetView Discussion <nv-l@tkg.com> oleum.com> cc: Sent by: Subject: RE: [NV-L] ISDN port colour owner-nv-l@tkg.com problem through Netview 11/12/01 01:02 AM Please respond to IBM NetView Discussion Hi Bill / Leslie, I have put $ before some of the routers having ISDN port in seed file as suggested by you but is of no help. I am skeptical that this is going to help in our case because what I believe this $ is to force a node to use SNMP for its Admin/Oper status update instead of ICMP ping if it is not having serial interfaces. One more thing I wanted to share that in our case ISDN call can be initiated from router side only and it can not be initiated from the central place where our NetView is sitting. But, again this is the case for all routers having isdn port as fall up arrangement and NetView treating them differently. When I do snmp poll for these pink/red color interface, the output comes differently. Also, I do not understand why TNV marks it red/Critical when it is actually in stand by mode? Regards.....Anupam -----Original Message----- From: Bill Evans [mailto:wvevans@attglobal.net] Sent: Sunday, November 11, 2001 11:42 PM To: IBM NetView Discussion Subject: Re: [NV-L] ISDN port colour problem through Netview I'd like to believe that the system automatically handles admin down but we've just put in a number of 6.0.2 NT systems where the admin down were discovered as critical. We added the "$" entry to the seed file and they turned pink when we restarted netmon and the GUI and looked. The reason I'm tentative about the topic is that I didn't follow up on the situation and find out why they weren't automatically polled with SNMP -- I expected the SNMP poll due to the presence of serial interfaces on the box. It might also be a Unix vs. NT difference. One of these days I'm going to figure out how ATM, Frame Relay and Point-to-Point interfaces interact with SNMP polling and if there are differences not documented. It's moot now with 7.1 available but there might be something support should have addressed in the area which is bypassed with the forced use of SNMP. Bill Leslie Clark wrote: > There might be something to that, but I don't think it should be > permanent. Even when status-polled with ping, an admin-down > interface should show as user1. If it were admin-up when first > discovered, then went admin-down later, it would be red, true. But > it should switch on the next configuration poll, or demandpoll, > I think, to user1. If it does not, it might be a case for Support. > > Oh - perhaps it is the Oper status that is the problem. If it is > Dormant, then regardless of what the Admin status is, it will > show as down. That is one of the things enhanced in V7.1. > > Cordially, > > Leslie A. Clark > IBM Global Services - Systems Mgmt & Networking > Detroit > > > > > Bill Evans > <wvevans@attgl To: IBM NetView Discussion <nv-l@tkg.com> > obal.net> cc: > Sent by: Subject: Re: [NV-L] ISDN port colour > owner-nv-l@tkg problem through Netview > .com > > > 11/10/01 04:05 > PM > Please respond > to IBM NetView > Discussion > > > > > > Check whether both routers are being polled by SNMP. If one is polled > by ICMP and the other by SNMP it could explain the difference. The > archives and product manuals explain the details but there are a couple > ways to force SNMP polling; a "$" entry in the seed file or a "P" in the > oid_to_type file entry. > > anand anupam wrote: > > >>Hi, >> >>As you rightly said that backup isdn line with a status of AdminDown >>will also be USER1 ( it should not be critical ). >> >>But, the problem in our case is NetView assigns USER1(7) with pink >>color and Critical(4) with red color for the same situation on different >>routers. >> >>Any idea what could be possible reason and where to look into? >> >> >>Regards, >> >>Anupam >> >> >> >>-----Original Message----- >>From: Oliver Bruchhaeuser [mailto:oliver.bruchhaeuser@de.ibm.com] >>Sent: Friday, November 09, 2001 7:13 PM >>To: IBM NetView Discussion >>Subject: Re: [NV-L] ISDN port colour problem through Netview >> >> >>Tim, >> >>update to NetView 7.1 ! >>In this version the dormant status of ISDN interfaces is managed >> > correctly. > >> From the release notes 7.1: >> >>Monitor ISDN Backup Interfaces >>By default, interfaces with an SNMP ifOperStatus of DORMANT are handled >>as if the status is NORMAL and the icon status color will be NORMAL. >>However, in the special case of ISDN backup lines, when the status is >>NORMAL, it usually means the primary line has a problem, and when >>DORMANT, the primary line is usually okay. In this case the status >>transitions to UP, and DORMANT might indicate the need for operator >>intervention. >>The following features are intended to help operators handle ISDN backup >>lines: >>* The status of a backup line in DORMANT state is USER1, otherwise the >>status is as usual (NORMAL, DOWN). Note that the backup line with a >>status of AdminDown will also be USER1. >>* When the status changes to UP (from any state) the event Backup Line is >>ACTIVE is sent. >>* When the status transitions to DORMANT (from any state, including >>AdminDown) the event Backup Line is DORMANT is sent. >> >> >>Kind regards >> >>Oliver Bruchhaeuser >>Tivoli NetView EMEA L2 Support >> >>IBM Deutschland GmbH - ITS Tivoli - Dept. 7977 - Hechtsheimer Str. 2 - >>55131 Mainz - Germany >>Phone: +49-6131-84-5108 - Fax: +49-6131-84-6585 - email: >>bruchhae@de.ibm.com >> >>Need help with Tivoli Software Products? >>Ask Tivoli! >>http://www.tivoli.com/asktivoli (login with your customer account) >> >> >> >> > >> >> >>Tim.Uekermann@gec >> > >> >> its-eu.com To: >>nv-l@tkg.com >> >> Sent by: >>cc: >> > >> >> owner-nv-l@tkg.co Subject: Re: [NV-L] ISDN >>port colour problem through Netview >> >> >>m >> > >> >> > >> >> > >> >> 09.11.2001 >>12:55 >> > >> >> Please respond >>to >> > >> >> IBM >>NetView >> > >> >> >>Discussion >> > >> >> > >> >> > >> >> >> >> >> >>Hi, >> >>so far as I know, all ISDN Interfaces are treated as down when inactive. >>Pink only shows up when the Port is manually shut down (administratively >>shutdown) >> >>We use a solution, where we catch the ISDN traps to operate a "backup >> > icon" > >>which turns red when ISDN becomes active. >> >>Gruesse - Best regards >> >>Tim Uekermann >>European Information Management >>GE CompuNet Computer Distribution >>Europaring 34-40, 50170 Kerpen, Germany >>Phone: +49 (0) 22 73/597-7560, Fax: +49 (0) 22 73/597-186, Mobile: >>01728348119 >>E-Mail : Tim.Uekermann@gecits-eu.com >>Visit us on the Internet: http://www.gecits-eu.com >> >> >>This email is confidential. If you are not the intended recipient, >>you must not disclose or use the information contained in it. >>If you have received this mail in error, please tell us >>immediately by return email and delete the document. >> >> >> >> >> >>ananda@bharatpetroleum.com@tkg.com on 09.11.2001 12:38:30 >> >>Please respond to nv-l@tkg.com >> >>Sent by: owner-nv-l@tkg.com >> >> >>To: nv-l@tkg.com >>cc: >>Subject: [NV-L] ISDN port colour problem through Netview >> >> >> >> > -------------------------------------------------------------------------- > >> >> >> >> >>Hi All, >> >>I am having NetView 6.0.2 on AIX 4.3.3. >> >>We are monitoring ISDN ports configured on different cisco routers. ISDN >>port has been configures mainly as fall back arrangement. >> >>When these ports are not in use, it goes into inactive stage. >> >>The problem is Netview detects these inactive interface differently on >>different routers. In some cases, it shows pink color ( IP status - >>User1(7) and in some cases it gives red color ( IP status - Critical(4). >>Because of these different behaves, other different related actions are >>initiated. >> >>We have checked the configuration for these interfaces on routers and it >>appears to be the same. >> >>Has anybody experienced the same problem? What could be the possible >>reasons and where to look into? >> >>How NetView treats ISDN/port when in inactive stage ? >> >>Please reply ASAP. >> >>Thanks in advance, >> >>Regards, >> >>Anupam >> >> >> >> >> >> >>_________________________________________________________________________ >>NV-L List information and Archives: http://www.tkg.com/nv-l >> >> >> >>_________________________________________________________________________ >>NV-L List information and Archives: http://www.tkg.com/nv-l >> >> > > > -- > Bill Evans -- Consultant in Enterprise Systems Management > reply-to: wvevans@prodigy.net (or Bill_Evans@sra.com) > Phone: 919-696-7513 > Send short text messages to 9196967513@messaging.sprintpcs.com > > _________________________________________________________________________ > NV-L List information and Archives: http://www.tkg.com/nv-l > > > > _________________________________________________________________________ > NV-L List information and Archives: http://www.tkg.com/nv-l > > -- Bill Evans -- Consultant in Enterprise Systems Management reply-to: wvevans@prodigy.net (or Bill_Evans@sra.com) Phone: 919-696-7513 Send short text messages to 9196967513@messaging.sprintpcs.com _________________________________________________________________________ NV-L List information and Archives: http://www.tkg.com/nv-l _________________________________________________________________________ NV-L List information and Archives: http://www.tkg.com/nv-l #### admin_data_pink_rt.txt has been removed from this note on November 13 2001 by Leslie Clark #### DPdata_pink_rt.txt has been removed from this note on November 13 2001 by Leslie Clark #### DPdata_red_rt.txt has been removed from this note on November 13 2001 by Leslie Clark #### oper_data_pink_rt.txt has been removed from this note on November 13 2001 by Leslie Clark
ATTP638G
ATTP794Y
ATTLB9CM
ATTCVW3Q |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: event message just shown incompletely, Karsten . Schweiger |
---|---|
Next by Date: | Cisco Content Switches., Westphal, Raymond |
Previous by Thread: | RE: ISDN port colour problem through Netview, anand anupam |
Next by Thread: | demandpoll fails, helmut . schroeder . hs |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Archive operated by Skills 1st Ltd
See also: The NetView Web