Check whether both routers are being polled by SNMP. If one is polled
by ICMP and the other by SNMP it could explain the difference. The
archives and product manuals explain the details but there are a couple
ways to force SNMP polling; a "$" entry in the seed file or a "P" in the
oid_to_type file entry.
anand anupam wrote:
> Hi,
>
> As you rightly said that backup isdn line with a status of AdminDown
> will also be USER1 ( it should not be critical ).
>
> But, the problem in our case is NetView assigns USER1(7) with pink
> color and Critical(4) with red color for the same situation on different
> routers.
>
> Any idea what could be possible reason and where to look into?
>
>
> Regards,
>
> Anupam
>
>
>
> -----Original Message-----
> From: Oliver Bruchhaeuser [mailto:oliver.bruchhaeuser@de.ibm.com]
> Sent: Friday, November 09, 2001 7:13 PM
> To: IBM NetView Discussion
> Subject: Re: [NV-L] ISDN port colour problem through Netview
>
>
> Tim,
>
> update to NetView 7.1 !
> In this version the dormant status of ISDN interfaces is managed correctly.
>
> From the release notes 7.1:
>
> Monitor ISDN Backup Interfaces
> By default, interfaces with an SNMP ifOperStatus of DORMANT are handled
> as if the status is NORMAL and the icon status color will be NORMAL.
> However, in the special case of ISDN backup lines, when the status is
> NORMAL, it usually means the primary line has a problem, and when
> DORMANT, the primary line is usually okay. In this case the status
> transitions to UP, and DORMANT might indicate the need for operator
> intervention.
> The following features are intended to help operators handle ISDN backup
> lines:
> * The status of a backup line in DORMANT state is USER1, otherwise the
> status is as usual (NORMAL, DOWN). Note that the backup line with a
> status of AdminDown will also be USER1.
> * When the status changes to UP (from any state) the event Backup Line is
> ACTIVE is sent.
> * When the status transitions to DORMANT (from any state, including
> AdminDown) the event Backup Line is DORMANT is sent.
>
>
> Kind regards
>
> Oliver Bruchhaeuser
> Tivoli NetView EMEA L2 Support
>
> IBM Deutschland GmbH - ITS Tivoli - Dept. 7977 - Hechtsheimer Str. 2 -
> 55131 Mainz - Germany
> Phone: +49-6131-84-5108 - Fax: +49-6131-84-6585 - email:
> bruchhae@de.ibm.com
>
> Need help with Tivoli Software Products?
> Ask Tivoli!
> http://www.tivoli.com/asktivoli (login with your customer account)
>
>
>
>
>
>
>
> Tim.Uekermann@gec
>
>
>
> its-eu.com To:
> nv-l@tkg.com
>
> Sent by:
> cc:
>
>
> owner-nv-l@tkg.co Subject: Re: [NV-L] ISDN
> port colour problem through Netview
>
>
> m
>
>
>
>
>
>
>
>
>
>
>
> 09.11.2001
> 12:55
>
>
>
> Please respond
> to
>
>
>
> IBM
> NetView
>
>
>
>
> Discussion
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi,
>
> so far as I know, all ISDN Interfaces are treated as down when inactive.
> Pink only shows up when the Port is manually shut down (administratively
> shutdown)
>
> We use a solution, where we catch the ISDN traps to operate a "backup icon"
> which turns red when ISDN becomes active.
>
> Gruesse - Best regards
>
> Tim Uekermann
> European Information Management
> GE CompuNet Computer Distribution
> Europaring 34-40, 50170 Kerpen, Germany
> Phone: +49 (0) 22 73/597-7560, Fax: +49 (0) 22 73/597-186, Mobile:
> 01728348119
> E-Mail : Tim.Uekermann@gecits-eu.com
> Visit us on the Internet: http://www.gecits-eu.com
>
>
> This email is confidential. If you are not the intended recipient,
> you must not disclose or use the information contained in it.
> If you have received this mail in error, please tell us
> immediately by return email and delete the document.
>
>
>
>
>
> ananda@bharatpetroleum.com@tkg.com on 09.11.2001 12:38:30
>
> Please respond to nv-l@tkg.com
>
> Sent by: owner-nv-l@tkg.com
>
>
> To: nv-l@tkg.com
> cc:
> Subject: [NV-L] ISDN port colour problem through Netview
>
>
> --------------------------------------------------------------------------
>
>
>
>
>
> Hi All,
>
> I am having NetView 6.0.2 on AIX 4.3.3.
>
> We are monitoring ISDN ports configured on different cisco routers. ISDN
> port has been configures mainly as fall back arrangement.
>
> When these ports are not in use, it goes into inactive stage.
>
> The problem is Netview detects these inactive interface differently on
> different routers. In some cases, it shows pink color ( IP status -
> User1(7) and in some cases it gives red color ( IP status - Critical(4).
> Because of these different behaves, other different related actions are
> initiated.
>
> We have checked the configuration for these interfaces on routers and it
> appears to be the same.
>
> Has anybody experienced the same problem? What could be the possible
> reasons and where to look into?
>
> How NetView treats ISDN/port when in inactive stage ?
>
> Please reply ASAP.
>
> Thanks in advance,
>
> Regards,
>
> Anupam
>
>
>
>
>
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
--
Bill Evans -- Consultant in Enterprise Systems Management
reply-to: wvevans@prodigy.net (or Bill_Evans@sra.com)
Phone: 919-696-7513
|