RE: ISDN port colour problem through Netview

[anand anupam <ananda@bharatpetroleum.com>]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

Hi,

 All ISDN/BRI port with both color ( pink + red) shows the same thing i.e -
Standby mode, Line protocol is down.

When I see object information of the interface with red colour, IP status is
critical(4) , whereas, in case of pink colour interface it is user1(7).

Any idea where to look into?

Regds...........Anupam

-----Original Message-----
From: Tim.Uekermann@gecits-eu.com [mailto:Tim.Uekermann@gecits-eu.com]
Sent: Friday, November 09, 2001 5:26 PM
To: nv-l@tkg.com
Subject: Re: [NV-L] ISDN port colour problem through Netview



Hi,

so far as I know, all ISDN Interfaces are treated as down when inactive.
Pink only shows up when the Port is manually shut down (administratively
shutdown)

We use a solution, where we catch the ISDN traps to operate a "backup icon"
which turns red when ISDN becomes active.

Gruesse - Best regards

Tim Uekermann
European Information Management
GE CompuNet Computer Distribution
Europaring 34-40, 50170 Kerpen, Germany
Phone: +49 (0) 22 73/597-7560, Fax: +49 (0) 22 73/597-186, Mobile:
01728348119
E-Mail : Tim.Uekermann@gecits-eu.com
Visit us on the Internet: http://www.gecits-eu.com


This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.





ananda@bharatpetroleum.com@tkg.com on 09.11.2001 12:38:30

Please respond to nv-l@tkg.com

Sent by:  owner-nv-l@tkg.com


To:     nv-l@tkg.com
cc:
Subject:  [NV-L] ISDN port colour problem through Netview
                                                                            
                                                                            
 -------------------------------------------------------------------------- 





Hi All,

I am having NetView 6.0.2 on AIX 4.3.3.

We are monitoring ISDN ports configured on different cisco routers. ISDN
port has been configures mainly as fall back arrangement.

When these ports are not in use, it goes into inactive stage.

The problem is Netview detects these inactive interface differently on
different routers. In some cases, it shows pink color ( IP status -
User1(7) and in some cases it gives red color ( IP status - Critical(4).
Because of these different behaves, other different related actions are
initiated.

We have checked the configuration for these interfaces on routers and it
appears to be the same.

Has anybody experienced the same problem? What could be the possible
reasons and where to look into?

How NetView treats ISDN/port when in inactive stage ?

Please reply ASAP.

Thanks in advance,

Regards,

Anupam






_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l

Hi,

 All ISDN/BRI port with both color ( pink + red) shows the same thing i.e - Standby mode, Line protocol is down.

When I see object information of the interface with red colour, IP status is critical(4) , whereas, in case of pink colour interface it is user1(7).

Any idea where to look into?

Regds...........Anupam

-----Original Message-----
From: Tim.Uekermann@gecits-eu.com [mailto:Tim.Uekermann@gecits-eu.com]
Sent: Friday, November 09, 2001 5:26 PM
To: nv-l@tkg.com
Subject: Re: [NV-L] ISDN port colour problem through Netview

Hi,

so far as I know, all ISDN Interfaces are treated as down when inactive.
Pink only shows up when the Port is manually shut down (administratively
shutdown)

We use a solution, where we catch the ISDN traps to operate a "backup icon"
which turns red when ISDN becomes active.

Gruesse - Best regards

Tim Uekermann
European Information Management
GE CompuNet Computer Distribution
Europaring 34-40, 50170 Kerpen, Germany
Phone: +49 (0) 22 73/597-7560, Fax: +49 (0) 22 73/597-186, Mobile:
01728348119
E-Mail : Tim.Uekermann@gecits-eu.com
Visit us on the Internet: http://www.gecits-eu.com

This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.

ananda@bharatpetroleum.com@tkg.com on 09.11.2001 12:38:30

Please respond to nv-l@tkg.com

Sent by:  owner-nv-l@tkg.com

To:     nv-l@tkg.com
cc:
Subject:  [NV-L] ISDN port colour problem through Netview
                                                                           
                                                                           
 --------------------------------------------------------------------------

Hi All,

I am having NetView 6.0.2 on AIX 4.3.3.

We are monitoring ISDN ports configured on different cisco routers. ISDN
port has been configures mainly as fall back arrangement.

When these ports are not in use, it goes into inactive stage.

The problem is Netview detects these inactive interface differently on
different routers. In some cases, it shows pink color ( IP status -
User1(7) and in some cases it gives red color ( IP status - Critical(4).
Because of these different behaves, other different related actions are
initiated.

We have checked the configuration for these interfaces on routers and it
appears to be the same.

Has anybody experienced the same problem? What could be the possible
reasons and where to look into?

How NetView treats ISDN/port when in inactive stage ?

Please reply ASAP.

Thanks in advance,

Regards,

Anupam

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l