nv-l
[Top] [All Lists]

Re: tecad_nv6k starts with EIF error

To: nv-l@lists.tivoli.com
Subject: Re: tecad_nv6k starts with EIF error
From: "James Shanks" <jshanks@us.ibm.com>
Date: Fri, 21 Dec 2001 22:27:29 -0500
6.0.3 has only been out for two weeks.  My group sends it to manufacturing
and you must order it from them.  I don't know who is responsible for
putting the Release Notes on the web site.  We don't maintain that either.
That's why I know you don't have it -- it is not generally available in the
US yet, let alone outside it.   And that;s why I would call Support and
pursue using the e-fix until you can get it.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group




                                                                                
      
                    Eliza Chi                                                   
      
                    <elizachi728@y       To:     IBM NetView Discussion         
      
                    ahoo.com>             <nv-l@tkg.com>                        
      
                    Sent by:             cc:                                    
      
                    owner-nv-l@tkg       Subject:     Re: [NV-L] tecad_nv6k 
starts    
                    .com                  with EIF error                        
      
                                                                                
      
                                                                                
      
                    12/21/01 04:59                                              
      
                    PM                                                          
      
                    Please respond                                              
      
                    to IBM NetView                                              
      
                    Discussion                                                  
      
                                                                                
      
                                                                                
      



James,

I could not find Netview 6.0.3 release notes on Tivoli
web site.  I saw 6.0, 6.0.1, 6.0.2 and then 7.1.

Does Tivoli still have a 6.0.3 CDs for NT?

Thanks
Mei
--- James Shanks <jshanks@us.ibm.com> wrote:
> I would call Support and get the latest tecad binary
> from them there were
> problems with the EIF library build in 6.0, 6.0.1,
> and 6.0.2, which are
> not corrected until 6.0.3.  The APAR is PJ28060.  I
> would not even attempt
> to proceed without this fix.  And I would make plans
> to get 6.0.3 itself.
>
> James Shanks
> Level 3 Support  for Tivoli NetView for UNIX and NT
> Tivoli Software / IBM Software Group
>
>
>
>
>
>
> Eliza Chi <elizachi728@yahoo.com>
> Sent by: owner-nv-l@tkg.com
> 12/21/2001 03:00 PM
> Please respond to IBM NetView Discussion
>
>
>         To:     nv-l@tkg.com
>         cc:
>         Subject:        [NV-L] tecad_nv6k starts
> with EIF error
>
>
>
> Hi,
>
> Can someone help me to figure out the problem?
> Thanks
> in advance.
>
> ---------------------------
> My environment:
>
> Spoke TMR server 3.6.2, (NT)/Netview Server 6.0.1
> (NT)
> TEC Netview adapter 3.6 are on one machine which is
> my
> Netview server.
>
> Hub TMR 3.6.2 (NT)
>
> TEC 3.6.2 (NT) in hub TMR.
> -----------------------------
> I have been tring to send netview events to the TEC
> server in the hub TMR, but the behavior attribute of
> "ovstatus tecad_nv6k" always shows:
> started... then not running.
> I looked at log file from the tecio module
> configured
> in tecad_nv6k.err and saw the following error
> message.
>
>
> Fri Dec 21 14:14:03 2001   FATAL: TECIO  , err 01,
> ibtecad/tec_io.c line 0516: C
> annot create EIF handle. Please check the .conf
> file.
>
> I know this message is related to the ServerLocation
> in tecad_nv6k.conf, but I configured the
> ServerLocation:
>
>      ServerLocation=@EventServer#hub_tmr-region
>
> I even tried @EventServer, Server IP, Server
> hostname
> but to the same error message. (I knew these did not
> make sense to me, but I just tried)
>
> I have done:
>
> 1. wlsconn on both hub tmr and spoke tmr/Netview
> I saw two way interconnected tmrs
>
> 2. odadmin odlist on both tmr and they are fine
>
> 3. wupdate -r EventServer hub_tmr-region on the
> spoke tmr/netview server,
>
> 4. wlookup -ar EventServer
> shows the EventServer with the hub tmr region oid
>
> 5. wpostemsg OV_IF_Down events works fine from a
> CLI,
> tec processed the OV_IF_Down messages, the events
> were
> displayed on TEC Console
>
> but I still can't bring up tecad_nv6k. Did I miss
> anything?
>
> I installed TEC on the spoke tmr/Netview server
> once,
> but I did wdel /Library/EventServer and wregister -u
> -r
> EventServer EventServer, wchkdb, so the spoke
> tmr/netview now only sees the tec server in hub tmr
> and wpostemsg works fine.
>
> Did anyone get this error before.  Does any one know
> what ibtecad/tec_io.c line 0516 is trying to check?
>
>
>
> Eli
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Check out Yahoo! Shopping and Yahoo! Auctions for
> all of
> your unique holiday gifts! Buy at
> http://shopping.yahoo.com
> or bid at http://auctions.yahoo.com
>
_________________________________________________________________________
> NV-L List information and Archives:
> http://www.tkg.com/nv-l
>
>
>


__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web