Santosh,
Netview gets the mask information from SNMP, we have seen in the past
where the SNMP agent
was reporting a mask that differed from the one shown in the setup of
the interface. First, look at
the information being provided by SNMP if it is incorrect there, it will
be incorrect in Netview. If
this is the case it should be reported to the vendor of the device.
Paul Stroud
z_esm_karekars wrote:
Hello,
I have NetView 6.0.2 on AIX 4.3.3 with TIPN Installed, using Db2 as
database
During accessing one of the TIPN Query for suspecision Subnet Mask, we
modified the query for the subnets not used in our environment. and it
is observed that few of the Servers showing wrong subnet mask.
When we confirmed with the Server owner department about the subnet,
it is confirmed to be normal. When we checked through NetView Console
Tools --> Interface details, this itself shows the wrong subnet mask
for that Server.
Such type of not existant subnets are shown for large no. of Servers
hence I had taken case of two such servers and deleted them form the
Map, done ovtopfix and rediscovered them, but still the Mask is not
proper.
Can U please advice how could we get the things restored.
Regards,
Santosh
|