Santosh,
What is the mask you are seeing and the mask you expect to see as well
as the subnet
address that NetView is showing and the correct subnet?
Paul
z_esm_karekars wrote:
Paul,
I had another setup as LAB setup where I could see that the same
Servers are showing proper Subnet Mask, hence I could conclude that
the SNMP configuration is proper.
Please advice.
Regards,
Santosh
----------
From: Paul[SMTP:pstroud@bellsouth.net]
Sent: Wednesday, January 23, 2002 5:34 PM
To: z_esm_karekars
Cc: 'nv-l@lists.tivoli.com'
Subject: Re: [nv-l] Subnet Mask discovery problem
Santosh,
Netview gets the mask information from SNMP, we have seen in the
past
where the SNMP agent
was reporting a mask that differed from the one shown in the
setup of
the interface. First, look at
the information being provided by SNMP if it is incorrect there,
it will
be incorrect in Netview. If
this is the case it should be reported to the vendor of the device.
Paul Stroud
z_esm_karekars wrote:
> Hello,
>
> I have NetView 6.0.2 on AIX 4.3.3 with TIPN Installed, using
Db2 as
> database
>
> During accessing one of the TIPN Query for suspecision Subnet
Mask, we
> modified the query for the subnets not used in our
environment. and it
> is observed that few of the Servers showing wrong subnet mask.
>
> When we confirmed with the Server owner department about the
subnet,
> it is confirmed to be normal. When we checked through NetView
Console
> Tools --> Interface details, this itself shows the wrong
subnet mask
> for that Server.
>
> Such type of not existant subnets are shown for large no. of
Servers
> hence I had taken case of two such servers and deleted them
form the
> Map, done ovtopfix and rediscovered them, but still the Mask
is not
> proper.
>
> Can U please advice how could we get the things restored.
>
> Regards,
> Santosh
>
>
>
|